The faucet ships at approximately 2.33 pounds and integrates into commercial sink setups where reliability and straightforward plumbing connections matter. The product meets expectations for professional kitchens, hospitals, schools, and bars that demand consistent cleaning performance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug refrigeration and remove contents. Mix detergent with warm water and scrub surfaces with a soft cloth. Clean condenser coils with a stiff brush and vacuum; inspect and straighten cooling fins. Degrease ovens and vents with an alkaline cleaner, then rinse and dry. Wipe stainless surfaces with a non-abrasive cleaner and microfiber cloth. Clean faucet aerators and hose threads, flush lines, and check seals. Record cleaning dates for CSA and health inspections.#@@#Additional Info#@#T&S Brass B-0717 faucet mounts to the wall, providing commercial-grade flow via a 3/4" hose-thread spout and 1/2" IPS female inlet. It weighs 2.33 pounds, fits 5–8 inch centers, and meets CSA durability standards for kitchens and janitorial stations.#@@#General Info#@#Description #@#
The faucet ships at approximately 2.33 pounds and integrates into commercial sink setups where reliability and straightforward plumbing connections matter. The product meets expectations for professional kitchens, hospitals, schools, and bars that demand consistent cleaning performance.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the T&S Brass B-0717 Single Sink Faucet by inspecting fittings weekly and tightening the 1/2" IPS female inlet connections as needed. Flush the 3/4" hose thread spout monthly to remove debris. Descale internal passages quarterly using an appropriate mild acid solution, then rinse with potable water. Lubricate O-rings with FDA-grade silicone grease during reassembly. Verify wall-mounted anchors for torque and replace worn seals to prevent leaks.