For busy kitchens that require precise control and durable performance, this wall-mount mixing spray assembly ensures consistent flow and effortless operation. Designed for continuous use, the unit features a bent spout and lever handle to streamline washdown tasks while adhering to Low Lead requirements for compliance and safety.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and shut water supply. Remove spray hose and check for debris. Flush lines until water runs clear. Mix mild detergent with warm water and wipe brass surfaces with a soft cloth. Clean nozzle and spout with a non-abrasive brush. Rinse and dry all parts. Lubricate moving parts as per specs. Reconnect water and check for leaks. Regular cleaning prevents contamination, fire hazards, higher bills, breakdowns, and failed inspections.#@@#Additional Info#@#T&S Brass B-0167-02 wall-mount mixing faucet with 8" centers has a bent spout and lever handle for commercial washdown stations. Low lead construction and integrated spray assembly ensure robust flow control for restaurants and hospitals.#@@#General Info#@#Description #@#
For busy kitchens that require precise control and durable performance, this wall-mount mixing spray assembly ensures consistent flow and effortless operation. Designed for continuous use, the unit features a bent spout and lever handle to streamline washdown tasks while adhering to Low Lead requirements for compliance and safety.
#@@# Wall Mount#@#
Mount the assembly to splash or wall surfaces to free up deck space and simplify installation in compact back-of-house layouts. The 8" faucet centers provide standard alignment with existing plumbing, facilitating rapid access to the spray hose.
#@@# Mixing Valve#@#
Integrate a mixing valve that balances hot and cold lines to maintain a predictable outlet temperature under varying flow conditions. Operators can adjust the lever handle to fine-tune water temperature without interrupting service.
#@@# Spray Hose#@#
Utilize the attached spray hose for targeted washdown and pot rinsing, significantly reducing manual scrubbing time and enhancing sanitation cycles. The spray assembly efficiently routes water to concentrated areas, minimizing water waste during cleaning.
#@@# Bent Spout#@#
Employ a bent spout profile to direct flow away from mounting hardware and toward sinks or floor drains, minimizing splash and improving reach. This design supports access to large cookware and tall containers without the need to reposition equipment.
#@@# Lever Handle#@#
Operate the lever handle for single-handed control that accelerates temperature changes and flow modulation during peak service. The handle design resists sticking, allowing staff to engage the faucet even while wearing gloves.
#@@# Compliance Rated#@#
Specify a Low Lead compliant unit that meets current potable water safety standards and reduces administrative risk during inspections. The assembly carries standard commercial specifications suitable for food service, institutional, and hospitality environments.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the T&S Brass B-0167-02 spray assembly weekly for leaks and loose fittings; tighten all connections with appropriate tools to maintain Low Lead compliance. Flush the spray hose daily to remove deposits and prevent nozzle clogging. Lubricate the lever handle quarterly with NSF-approved lubricant and exercise the valve to ensure smooth Mixing action. Clean external surfaces with mild detergent; avoid abrasive cleaners to preserve the Bent spout finish and functional integrity.