The T&S Brass pre-rinse unit delivers concentrated rinsing power in a compact, wall-mounted configuration, engineered for continuous use in commercial kitchens and high-volume dishrooms. Built to reduce water waste while maintaining effective cleaning force, this assembly pairs a low-flow spray valve with durable ceramic valves for consistent operation and long service life.
LongDescription#@#NA#@@#Cleaning Instructions#@#Shut off water, remove spray valve; soak in soapy water, scrub nozzle openings with a soft brush. Wipe handles, spout, and hose with mild detergent to remove residue. Clean wall bracket and spout with non-abrasive cleaner; avoid harsh chemicals on valves. Flush lines, dry fittings, check seals for wear. Regular cleaning prevents contamination, reduces fire risk, improves efficiency, lowers costs, and aids inspections.#@@#Additional Info#@#The T&S Brass B-0133-12CRBCF1 pre-rinse unit mounts to the wall with an 8" faucet center, 12" swing spout, 44" flex hose, ceramic valves, lever handles, .65 GPM spray valve, 1.0 GPM aerator, EPAct 2005 compliance, and NSF certification.#@@#General Info#@#Description #@#
The T&S Brass pre-rinse unit delivers concentrated rinsing power in a compact, wall-mounted configuration, engineered for continuous use in commercial kitchens and high-volume dishrooms. Built to reduce water waste while maintaining effective cleaning force, this assembly pairs a low-flow spray valve with durable ceramic valves for consistent operation and long service life.
#@@# Wall Mounted#@#
Installers will value the 8" faucet centers and splash wallmount design that position the unit where dishroom workflow requires it. The mounting arrangement secures the unit close to the sink line to shorten reach and minimize splashback.
#@@# Swing Spout#@#
A 12" add-on swing nozzle provides 10–16 inches of spout reach, enabling targeted rinsing across large pots and pans. The swivel action increases maneuverability so staff can move quickly between rinsing and filling tasks.
#@@# Low Flow Spray#@#
The .65 GPM low flow spray valve reduces water consumption without sacrificing cleaning performance, aligning with EPAct2005 efficiency expectations. Kitchens can lower utility costs while maintaining high-throughput rinsing cycles.
#@@# Durable Valves#@#
Ceramic cartridge valves deliver corrosion-resistant operation and precise control under repeated use. Operators will observe fewer maintenance interventions compared with traditional washer-type valve designs.
#@@# Dual-Mode Aerator#@#
An integrated 1.0 GPM vandal-resistant aerator offers controlled laminar flow for handwashing or filling, complementing the spray valve for mixed use scenarios. The dual-rate configuration helps teams switch tasks without changing fixtures.
#@@# Commercial Compliance#@#
NSF certification and low-lead construction ensure the assembly meets commercial health and safety standards. The 1/2" NPT connections simplify integration with existing plumbing systems and support regulatory compliance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#To maintain the T&S Brass B-0133-12Crbcf1 pre-rinse unit, flush supply lines and operate the .65 GPM spray valve to prevent buildup. Soak the 1.0 GPM aerator in descaling solution, rinse, and reinstall. Inspect handles and valves; replace cartridges if leaking. Clean the hose and spout with nonabrasive cleaner. Check wall bracket, mounting centers, and tighten connections for leak-free, compliant performance.