Stop compromising speed for control. This pre-rinse assembly delivers rapid, precise rinsing force while minimizing water use, enhancing kitchen throughput without sacrificing sanitation. Designed for heavy-duty service, the unit features a spring-action gooseneck and a JeTSpray low flow valve that reduces consumption while maintaining spray performance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and remove food and debris. Scrub surfaces with mild detergent and warm water, rinsing thoroughly. Sanitize food-contact areas with an EPA-registered sanitizer per label directions. Degrease ovens, hoods, and vents with a commercial degreaser; remove grease to reduce fire risk. Clean condenser coils and filters to improve efficiency. Dry all parts completely before reassembly and run a brief test cycle to confirm operation.#@@#Additional Info#@#T&S Brass B-0113-08C EasyInstall pre-rinse unit features a gooseneck and JeTSpray valve, mounts with a single-center configuration, has a 24" spout reach, weighs 13.16 pounds, and supports foodservice with durable components.#@@#General Info#@#Description #@#
Stop compromising speed for control. This pre-rinse assembly delivers rapid, precise rinsing force while minimizing water use, enhancing kitchen throughput without sacrificing sanitation. Designed for heavy-duty service, the unit features a spring-action gooseneck and a JeTSpray low flow valve that reduces consumption while maintaining spray performance.
#@@# Spring-Action Gooseneck#@#
The spring-action gooseneck returns the spray hose to a stable position after each use, reducing operator fatigue and limiting hose contact with counters. Engineers configured the spring tension to provide a positive return force while allowing full reach across sinks and rinsing stations.
#@@# JeTSpray Low Flow#@#
The JeTSpray low flow valve lowers water flow but preserves spray velocity, cutting water usage during peak service periods. Operators achieve consistent rinsing performance at reduced gallons per minute, supporting utility savings and compliance goals.
#@@# 24" Spout Length#@#
A 24" spout provides extended reach for large pots and multi-compartment sinks, enabling staff to rinse and move items without repositioning heavy cookware. The extended reach shortens task time and reduces ergonomic strain for staff handling bulky loads.
#@@# Deck Mounted Installation#@#
Deck mounted configuration simplifies retrofitting into existing countertops and sink platforms, offering a secure attachment point that resists wobble under frequent use. Technicians perform installations faster with standard single-hole centers and conventional mounting hardware.
#@@# Single Center Configuration#@#
Single center placement consolidates controls and feed lines into one point, streamlining plumbing runs and reducing potential leak paths. Facilities planners benefit from simplified maintenance and faster access to fluid connections during service.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the T&S Brass B-0113-08C EasyInstall pre-rinse unit by flushing lines weekly to prevent debris buildup and verifying JeTSpray low flow valve operation. Inspect spring action gooseneck for wear and lubricate swivel joints quarterly with food-grade lubricant. Tighten deck-mounted fittings monthly to avoid leaks and replace worn seals immediately. Calibrate spray pressure annually and document maintenance to prolong service life and ensure consistent performance.