Engineered for reliable low-flow performance, this pre-rinse spray head delivers cleaning power at 1.07 GPM, reducing water use and boosting efficiency. Designed for commercial kitchens, it combines a 90° spray angle with a self-closing mechanism to ensure steady throughput and save labor during dishwashing.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug spray valve assembly and relieve water pressure. Remove spray head; wash brass parts in warm, soapy water. Use a soft brush to clear nozzle deposits. Rinse thoroughly; inspect self-closing mechanism for wear or debris. Replace cracked seals. Clean swivel joint; dry parts before reassembly. Reattach spray head, test flow at 1.07 GPM, check for leaks. Regular cleaning prevents contamination, grease buildup, and equipment failure.#@@#Additional Info#@#T&S Brass B-0107-J90 pre-rinse spray head delivers a 1.07 GPM low-flow spray action with a 90° angle and self-closing valve, constructed in brass for commercial durability and weighing 1.41 pounds.#@@#General Info#@#Description #@#
Engineered for reliable low-flow performance, this pre-rinse spray head delivers cleaning power at 1.07 GPM, reducing water use and boosting efficiency. Designed for commercial kitchens, it combines a 90° spray angle with a self-closing mechanism to ensure steady throughput and save labor during dishwashing.
#@@# Low Flow Rate#@#
At 1.07 GPM, the spray head balances effective cleaning with water conservation, lowering utility costs without sacrificing rinse quality. Installers and managers benefit from predictable flow for load calculations and compliance with water-use standards.
#@@# Angled Spray Pattern#@#
The 90° spray angle focuses water coverage where needed, speeding up soil removal on dishes and cookware. Staff enjoy consistent rinse results, reducing repeat cycles and improving workflow.
#@@# Self-Closing Action#@#
The self-closing valve stops flow when the trigger is released, preventing runoff and enhancing sink control during busy shifts. Maintenance teams encounter fewer issues with unattended flow, supporting water-saving protocols.
#@@# Spray Action Head#@#
The spray-action design uses focused hydraulic force to remove tough residues while being gentle on fragile items. Supervisors streamline pre-rinse tasks and reduce breakage claims tied to harsher methods.
#@@# Brass Construction#@#
Durable forged brass resists corrosion and withstands daily use in high-temperature, high-moisture environments. Procurement teams rely on its long service life and fewer replacements compared to lower-grade materials.
#@@# Compact Service Weight#@#
Weighing 1.41 pounds, the head’s compact design simplifies retrofits and reduces strain on mounting hardware. Plumbers benefit from easy handling during installation and maintenance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the T&S Brass B-0107-J90 spray head by inspecting the nozzle and valve weekly for debris or buildup; clean deposits with a soft brush and mild descaler. Flush the valve with water after hard-water use to prevent clogs. Lubricate the self-closing mechanism annually with non-petroleum lubricant for brass. Check seals and O-rings quarterly, replacing worn parts. Rinse and dry brass surfaces after cleaning to prevent corrosion.