Expect robust materials designed for commercial use and repeated handling in high-volume kitchens. Maintenance schedules shrink as the nozzle resists wear, promoting steady performance for cafeterias, hospitals, and hospitality venues.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and empty the work area. Remove the nozzle and soak in warm water with a mild detergent for 10–15 minutes. Scrub aerator and gooseneck interior with a soft brush to remove scale and grease. Rinse with clean water and inspect seals; replace worn gaskets. Reinstall nozzle, run water to flush debris, and verify 2.2 GPM flow. Clean coils, vents, and grease traps on a scheduled basis to reduce fire risk, prevent contamination, lower energy use, and extend equipment life.#@@#Additional Info#@#The T&S Brass 5SP-05CA swivel gooseneck nozzle is 9-5/8" H with a 5-13/16" spread and a 2.2 GPM aerator for controlled flow. Its Low Lead construction and 0.7-pound weight ensure durability for commercial use.#@@#General Info#@#Description #@#
Expect robust materials designed for commercial use and repeated handling in high-volume kitchens. Maintenance schedules shrink as the nozzle resists wear, promoting steady performance for cafeterias, hospitals, and hospitality venues.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the T&S Brass 5SP-05CA swivel gooseneck nozzle per CSA and local codes to ensure compliant operation. Inspect O-rings and swivel joints monthly; replace seals at first sign of wear. Descale the 2.2 GPM aerator quarterly using a mild acidic solution; flush with potable water after soaking. Lubricate swivel bearings with food-grade silicone lubricant semiannually. Verify mounting torque and check for leaks after maintenance tasks.