T&S Brass delivers a swivel gooseneck nozzle engineered for commercial faucets that prioritizes durability and consistent flow in high-use environments. The nozzle mounts with a 10-5/16" height and 5-11/16" spread to accommodate deep sinks and wide basins, while providing a controlled 2.2 GPM flow rate that balances water economy with cleaning performance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the faucet or shut off the water. Twist the T&S Brass 133XP-F22 gooseneck nozzle counterclockwise to remove. Soak nozzle and aerator in mild detergent for five minutes. Scrub gently; avoid abrasives. Rinse, dry with a lint-free cloth. Inspect seals for damage; replace if needed. Reinstall by threading clockwise. Restore water, check for leaks. Cleaning prevents contamination, reduces grease fire risk, improves efficiency, and aids inspections.#@@#Additional Info#@#T&S Brass 133XP-F22 swivel nozzle has a 10-5/16" gooseneck spout, 5-11/16" spread, 2.2 GPM flow, low-lead construction, NSF and cCSAus certifications, and fits compatible faucet outlets.#@@#General Info#@#Description #@#
T&S Brass delivers a swivel gooseneck nozzle engineered for commercial faucets that prioritizes durability and consistent flow in high-use environments. The nozzle mounts with a 10-5/16" height and 5-11/16" spread to accommodate deep sinks and wide basins, while providing a controlled 2.2 GPM flow rate that balances water economy with cleaning performance.
#@@# Swivel Gooseneck#@#
The swivel gooseneck design allows 360-degree rotation for precise positioning and rapid access across sink areas. Its geometry supports tasks that require reach and flexibility, reducing the need to move heavy pots and pans during rinse cycles.
#@@# Optimized Height#@#
At 10-5/16" overall height, the nozzle clears tall cookware and stacked trays without compromising spray angle. The elevated profile improves operator ergonomics and minimizes splashback when rinsing large items.
#@@# Controlled Spread#@#
A 5-11/16" spread concentrates the water delivery for effective rinsing while limiting overspray onto adjacent surfaces. This spread aligns with typical commercial sink configurations to streamline workflow and maintain a cleaner prep area.
#@@# Regulated Flow#@#
The 2.2 GPM flow rate delivers steady performance for commercial cleaning applications while supporting water management goals. This setting preserves rinse effectiveness for soils and residues commonly encountered in restaurant and institutional kitchens.
#@@# Compliance Construction#@#
Manufactured to low lead specifications and certified by NSF and cCSAus, the nozzle meets regulatory requirements for potable water service in commercial facilities. Facilities managers can specify this component with confidence in public health and safety compliance.
#@@# Compact Weight Profile#@#
Weighing approximately 1 pound, the nozzle integrates without imposing excessive load on faucet assemblies or mounting hardware. The modest mass simplifies installation and reduces stress on swivel joints during prolonged use.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Please follow these steps to maintain your T&S Brass 133XP-F22 nozzle. Weekly, inspect for buildup and clean with vinegar to keep 2.2 GPM flow. Disassemble, soak parts in soapy water, and brush ports gently. Check seals, replace worn O-rings, and lubricate bearings quarterly. Verify NSF cCSAus labels and record dates. Reassemble correctly to maintain the 5-11/16" spread, 10-5/16" height, and spray pattern.