Unit weight registers approximately 0.88 pounds and meets Low Lead requirements, aligning with regulatory expectations for public and commercial installations. Procurement and facilities staff receive clear data for specification sheets and compliance reviews.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and shut water supply. Remove nozzle and soak in mild detergent and warm water for 10 minutes. Scrub aerator and gooseneck with a soft brush to remove grease and scale. Rinse and dry with a lint-free cloth. Inspect seals and fittings for wear; replace if damaged. Reinstall nozzle, restore water, and run for 30 seconds to flush debris. Clean weekly to prevent contamination, fires, higher utility use, equipment failure, and failed inspections.#@@#Additional Info#@#T&S Brass 132X-A22 swivel nozzle features a 9" gooseneck with 2-7/8" spread, chrome-plated brass construction, 2.2 GPM aerator and 4-7/8" clearance; low-lead compliance and 0.88 lb weight suit foodservice installations.#@@#General Info#@#Description #@#
Unit weight registers approximately 0.88 pounds and meets Low Lead requirements, aligning with regulatory expectations for public and commercial installations. Procurement and facilities staff receive clear data for specification sheets and compliance reviews.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the T&S Brass 132X-A22 nozzle weekly for mineral buildup and kleened debris. Remove the aerator and soak in a 1:1 white vinegar and water solution for 20–30 minutes, then brush with a nylon brush. Lubricate swivel joints with food-grade silicone grease every quarter to prevent stiffness. Tighten mounting hardware to specified torque values and verify 2.2 GPM flow remains consistent. Replace worn seals and low lead components promptly to maintain sanitary operation.