Specification lists a unit weight of 1.78 pounds, allowing staff to handle and mount the valve without specialized lifting gear. CSA referenced manufacturing and testing standards support compliance needs in institutional and commercial installations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment before cleaning and shut water supply. Remove visible debris and spray a food-safe detergent on valve and surrounding fittings. Scrub with a nylon brush; avoid steel pads. Rinse with potable water until no residue remains. Wipe dry with a lint-free cloth and inspect seals for wear; replace as needed. Clean weekly or after heavy use to reduce bacteria, prevent grease buildup, lower energy use, and ensure CSA and health inspections pass.#@@#Additional Info#@#T&S Brass 0RK1 wall-mount mixing control valve fits 4" centers, providing precise temperature control for commercial kitchens. It features machined brass for corrosion resistance, is CSA-certified, and weighs 1.78 pounds for easy installation.#@@#General Info#@#Description #@#
Specification lists a unit weight of 1.78 pounds, allowing staff to handle and mount the valve without specialized lifting gear. CSA referenced manufacturing and testing standards support compliance needs in institutional and commercial installations.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the T&S Brass 0RK1 mixing control valve per CSA guidelines and verify wall-mount anchors for 4" spacing. Inspect seals weekly and replace worn O-rings to prevent leaks. Flush lines monthly to remove sediment; document water volume in gallons and liters moved during service. Lubricate moving parts quarterly with food-grade lubricant. Calibrate flow and temperature controls after maintenance. Retighten fittings and test under full load before returning to service.