Stop sacrificing sanitation for convenience. This food waste reduction system grinds, dewaters, and compacts kitchen scraps into a transportable pulp, reducing haul-away volume while cutting disposal labor and cost. Designed for continuous operation in commercial kitchens, the system integrates a 5 HP grinder and a compact mini press to process waste efficiently and reliably.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and lock out power at 208/230v before service. Remove hopper debris, flush grinder with water to form slurry, then run grinder briefly to clear lines. Inspect seals and replace worn gaskets. Clean MP4 Mini Press inlet, wipe exterior with non-abrasive cleaner, and remove semi-dry pulp from haul-away container. Check condenser and vents for grease; degrease ovens and exhausts to reduce fire risk. Dry all surfaces and restore power only when fully dry and sealed.#@@#Additional Info#@#Somat MP4/B5 Mini Press with Grinder reduces food waste by grinding solids into slurry, conveying it to an MP4 mini press that extracts water and discharges semi-dry pulp.#@@#General Info#@#Description #@#
Stop sacrificing sanitation for convenience. This food waste reduction system grinds, dewaters, and compacts kitchen scraps into a transportable pulp, reducing haul-away volume while cutting disposal labor and cost. Designed for continuous operation in commercial kitchens, the system integrates a 5 HP grinder and a compact mini press to process waste efficiently and reliably.
#@@# Grinder Installation#@#
Mount the grinder in a trough, table, or sink to suit existing workflows. Engineers designed the unit to accept water with incoming waste, create a uniform slurry, and feed it reliably into downstream piping.
#@@# Grinding Performance#@#
Achieve consistent particle reduction with a 5 HP motor that processes high volumes of organic waste. Operators will notice reduced clogging and steady slurry flow, improving transfer efficiency to the press.
#@@# Press Dewatering#@#
Remove water from slurry using the MP4 mini press to produce a semi-dry pulp that reduces weight and haul volume. Facilities gain predictable discharge volumes and lower hauling frequency when they extract and separate liquid on site.
#@@# Water Recovery Option#@#
Integrate an optional return pump to recover extracted water and return it to the grinder for reuse. Managers can lower fresh water consumption and reduce discharge loads by recycling separated water back into the process.
#@@# Space Flexible Layout#@#
Install the mini press within 8 feet of the grinder and orient it in any direction, including under a table, to maximize footprint efficiency. Designers can retrofit the system into most scrapping areas or replace an existing disposer without major layout changes.
#@@# Controls And Operation#@#
Operate the system through a SOM-A-TROL control panel with a pushbutton station that simplifies start, stop, and monitor functions. Technicians will appreciate straightforward controls and service access that reduce downtime during routine maintenance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect grinder components weekly to remove food buildup and prevent blockages. Clean the press screen and hydraulic fittings daily with potable water and mild detergent; flush pipelines after peak shifts to avoid solids settling. Lubricate bearings and check belt tension monthly per Somat specs for alignment and motor efficiency. Verify electrical connections and 208/230v supply integrity quarterly, tightening terminals on 3-Ph panels.