Single support leg and unit only configuration streamline footprint and installation planning in retrofits and new builds. Procurement teams will coordinate faster installations and simplified service access for routine inspections.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and lock out power. Remove cone assembly and scrap ring. Flush housing with warm water, then apply mild detergent; scrub with non-abrasive brush. Rinse thoroughly and inspect seals and vacuum breaker for wear. Clean inlet and nozzle; check solenoid and flow control for debris. Wipe exterior aluminum housing with soft cloth. Reassemble, test manual reverse, then restore power. Regular cleaning prevents contamination, fires, inefficiency, breakdowns, and inspection failures.#@@#Additional Info#@#Salvajor's 500-CA-MRSS disposer has a heat-treated aluminum housing, 5 HP motor, 6-1/2" inlet, manual reverse switch, rubber scrap ring, chrome vacuum breaker, and solenoid; UL, CSA, CE certified, 115/208-230 volts, weight 141 pounds.#@@#General Info#@#Description #@#
Single support leg and unit only configuration streamline footprint and installation planning in retrofits and new builds. Procurement teams will coordinate faster installations and simplified service access for routine inspections.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the motor and cone assembly monthly for wear and secure fasteners. Clean the 6-1/2" inlet and rubber scrap ring weekly to prevent clogging; flush with potable water after each shift. Lubricate bearings per manufacturer schedule and verify solenoid operation and flow control for correct nozzle spray. Test manual reverse switch under load quarterly and confirm electrical connections to 115/208-230 volts meet CSA and UL requirements.