Weighing approximately 124 pounds, the unit balances mass for vibration control while remaining manageable for professional installers. Project planners will account for weight during delivery and mounting preparations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and lock out power at the breaker. Remove cover and debris from 6-1/2" inlet using a non-metallic tool. Flush interior with warm water, then apply a mild detergent solution; scrub aluminum housing with a soft brush. Rinse thoroughly and dry all surfaces. Inspect seals and sensor; replace worn parts to maintain CSA and UL compliance. Clean vents and coils monthly to prevent grease buildup and reduce fire risk, energy use, and equipment failure.#@@#Additional Info#@#Salvajor model 100-CA-12-WSP disposer has a 1 HP motor, aluminum housing, and a 12" cone with a 6-1/2" inlet. It operates on 115/208-230 volts, includes an operator sensor, and supports commercial workflows.#@@#General Info#@#Description #@#
Weighing approximately 124 pounds, the unit balances mass for vibration control while remaining manageable for professional installers. Project planners will account for weight during delivery and mounting preparations.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Culinary Depot usually ships Salvajor 100-CA-12-WSP Food Waste Disposer within # business days upon confirming cleared payment.#@@#Maintenance Guide#@#Inspect the Salvajor 100-CA-12-WSP disposer regularly for leaks and loose fasteners, and tighten mounting hardware to maintain alignment. Flush with hot water after each shift and run cold water during grinding to suspend grease; use enzymatic drain cleaner weekly to prevent buildup. Remove and clean the 12" cone assembly and 6-1/2" inlet screen monthly; verify electrical connections for 115/208-230 volts and test operator sensor function. Replace worn seals promptly.