The basic unit configuration simplifies parts tracking and reduces inventory complexity for service departments and dealers. Managers plan preventative maintenance with predictable component lists and standardized repair procedures.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and lock out power at the 208v supply. Remove rotor cover and inspect 8" rotor and bolt-on reversible impact bars for wear. Scrape out debris with a nylon scraper; avoid metal tools. Flush housing with warm water and a mild detergent solution mixed per CSA and manufacturer guidance. Rinse thoroughly and dry. Reinstall cover and restore power. Clean weekly to prevent clogs, reduce fire risk from grease, lower energy use, and avoid costly breakdowns.#@@#Additional Info#@#RedGoat A112P-R7 disposer, made of aluminum, provides 1 1/2 HP at 208 volts in a 3-phase setup. It features an 8" rotor with two reversible impact bars, weighs 117 pounds, and mounts to a 7" inlet for commercial dishwashing and waste processing.#@@#General Info#@#Description #@#
The basic unit configuration simplifies parts tracking and reduces inventory complexity for service departments and dealers. Managers plan preventative maintenance with predictable component lists and standardized repair procedures.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Culinary Depot usually Red Goat A112P-R7 Disposer within # business days upon confirming cleared payment.#@@#Maintenance Guide#@#Inspect the disposer weekly for loose fasteners and check the 2 bolt-on reversible impact bars for cracks. Clean the rotor chamber with a biodegradable degreaser and a soft brush, then flush with warm water. Remove scale from the aluminum housing using a mild acid solution at the recommended dilution; rinse thoroughly. Lubricate motor shaft bearings per service manual intervals and record torque values. Test electrical connections at 208v, phase 3, and verify CSA-compliant wiring.