Engineered as track and slide hardware, the assembly supports the demands of track shelving systems and heavy utility attachments, totaling a package weight of 103 pounds. Facility planners can calculate load and anchorage requirements precisely for safety and code compliance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and clear the area. Remove grease and debris from tracks using a degreaser and a nylon brush; rinse with water and wipe dry. Inspect chrome surfaces for pitting; buff lightly with a non-abrasive polish. Clean end plates and fasteners; tighten as needed. Vacuum overhead vents and remove buildup to prevent fires. Schedule coil and track cleaning monthly. Regular cleaning prevents bacteria, reduces fire risk, lowers energy use, and helps pass CSA and health inspections.#@@#Additional Info#@#Quantum's TTK-14 168" chrome-plated overhead track kit includes two 14' tracks, four end plates, weighs 103 pounds, carries NSF and CSA certifications, and mounts to overhead systems for commercial kitchens and hospitals, made in USA.#@@#General Info#@#Description #@#
Engineered as track and slide hardware, the assembly supports the demands of track shelving systems and heavy utility attachments, totaling a package weight of 103 pounds. Facility planners can calculate load and anchorage requirements precisely for safety and code compliance.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Quantum TTK-14 overhead track kit monthly for loose fasteners and corrosion on the chrome finish. Clean tracks with a nonabrasive cloth and mild detergent; rinse and dry to prevent mineral buildup. Lubricate rollers with a food-safe silicone spray every six months and verify alignment to prevent binding. Replace worn end plates or damaged hardware promptly. Document maintenance actions to support CSA and NSF compliance.
