Stop compromising cold display capacity for convenience. This drop-in frost top delivers continuous cold surface performance while integrating seamlessly into counters, enabling high-throughput service lines and controlled holding conditions for frozen confections and chilled mix-ins. Designed for food service professionals, the unit combines a robust cold plate with self-contained refrigeration to support sustained operations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and remove pans. Wipe stainless top and drip trough with mild detergent and a soft cloth. Flush 3/4" drain and remove debris from well. Clean condenser coils monthly to maintain efficiency; use a brush or vacuum. Inspect door seals and control box conduit for damage. Degrease vents and surrounding surfaces to reduce fire risk. Rinse and dry all parts before restoring power. Regular cleaning prevents contamination, equipment failure, higher bills, and inspection failures.#@@#Additional Info#@#Piper Products 2-FTDI 31.63"W Drop-In Frost Top offers a 31-5/8" by 25-5/8" work surface with a cold plate and drip troughs; R-134a refrigeration runs on 120v, 60 Hz, 1-Ph with a 3/4" drain, 6.3 amps, and a stainless steel edge for durability.#@@#General Info#@#Description #@#
Stop compromising cold display capacity for convenience. This drop-in frost top delivers continuous cold surface performance while integrating seamlessly into counters, enabling high-throughput service lines and controlled holding conditions for frozen confections and chilled mix-ins. Designed for food service professionals, the unit combines a robust cold plate with self-contained refrigeration to support sustained operations.
#@@# Stainless Construction#@#
Engineers built the top with a stainless steel surface and a feathered down edge on all sides to provide sanitary contact and simple wipe-down cleaning. Design choices reduce seams and crevices, minimizing food trap points and speeding daily sanitation routines.
#@@# Integrated Cold Plate#@#
Manufacturers configured a raised one-piece cold plate with two pan openings sized to accept standard pans, ensuring even temperature across the working area. Operators maintain product integrity with the plate rather than relying on intermittent ice, which stabilizes holding conditions.
#@@# Built Drain System#@#
Designers included a 3/4-inch drain built into the bottom of the well and a drip trough on all sides to channel melt and spills away from the product area. Staff can perform quick draining and prevent fluid buildup, which lowers cross-contamination risk and shortens clean cycles.
#@@# Remote Controls#@#
The factory-mounted remote control box connects via flexible conduit and provides an on/off switch plus an indicator light for clear operational status. Technicians can access controls without exposing refrigeration components, simplifying monitoring and reducing accidental adjustments.
#@@# Self-Contained Refrigeration#@#
Engineers specified a self-contained refrigeration system using R-134a to maintain consistent cold plate temperatures without external condensers. Facilities benefit from reduced installation complexity and predictable electrical requirements at 120V, 60 Hertz, single phase, drawing 6.3 amps.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser fins weekly and remove debris with a soft brush to sustain heat transfer efficiency. Empty drip trough and verify the 3/4" drain remains clear; flush with warm water and mild detergent monthly. Confirm door flange seals and the feathered down edge for integrity; replace worn seals promptly. Test the on/off switch, light, and remote-mounted control box for secure connections. Schedule R-134a leak inspections and document amp and voltage readings during preventive service.