The product carries CSA and cULus certification, reflecting compliance with recognized safety standards. Managers reduce liability exposure while meeting procurement specifications for institutional and commercial installations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and lock bowl. Remove blades carefully and wash stainless bowl, lid, and blades with warm, soapy water. Rinse and dry completely. Inspect seals and fasteners; tighten or replace if worn. Clean motor housing with a damp cloth; avoid direct water spray. Remove food debris from vents with a soft brush. Sanitize food-contact parts per CSA or local rules. Reassemble dry parts and restore power. Clean daily to prevent bacteria, grease fires, higher bills, and equipment failures.#@@#Additional Info#@#Omcan USA’s 47261 4 L stainless steel bowl cutter operates at 110v/60Hz/1-Ph with 350 Watts, offering a 4-liter capacity; stainless steel construction and ETL and cULus certifications ensure compliance for commercial food prep.#@@#General Info#@#Description #@#
The product carries CSA and cULus certification, reflecting compliance with recognized safety standards. Managers reduce liability exposure while meeting procurement specifications for institutional and commercial installations.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect blades and bowl daily for damage and sharpness, and replace components that show wear to maintain safety and cut quality. Lubricate bearings per manufacturer intervals and use food-grade lubricant only. Flush electrical contacts with compressed air after power-down and verify 110v supply and ground for stable operation. Sanitize stainless steel surfaces with approved cleaners and rinse thoroughly. Calibrate feed times to prevent motor overload.
