Designed for rigorous outdoor use, this -10°F walk-in freezer combines robust construction with efficient self-contained refrigeration to support high-volume cold storage needs. Contractors and facility managers will appreciate the coated steel exterior and interior that resist corrosion, while the integrated floor provides immediate load-bearing capacity. Engineers specified R-290 refrigerant and 208/230 volts to deliver reliable cold performance with a lower environmental impact.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and empty the freezer. Remove shelving and sweep debris. Mix mild detergent with warm water (no abrasive cleaners). Wipe interior and coated steel surfaces with a soft cloth, focusing on door seals and floor drains. Clean condenser coils and fans every 3 months to improve efficiency and reduce fire risk. Rinse surfaces, dry completely, then reconnect power.#@@#Additional Info#@#Norlake's KODF77612-C 72" Kold Locker outdoor freezer operates at -10°F with R-290 refrigeration on 208/230v/60Hz, 1-Ph power. It features a coated 26-gauge steel interior/exterior, self-closing door, membrane roof, and weighs 1,907 pounds.#@@#General Info#@#Description #@#
Designed for rigorous outdoor use, this -10°F walk-in freezer combines robust construction with efficient self-contained refrigeration to support high-volume cold storage needs. Contractors and facility managers will appreciate the coated steel exterior and interior that resist corrosion, while the integrated floor provides immediate load-bearing capacity. Engineers specified R-290 refrigerant and 208/230 volts to deliver reliable cold performance with a lower environmental impact.
#@@# Coated Steel#@#
Engineers built the unit with 26-gauge embossed coated steel on both interior and exterior surfaces to resist corrosion in outdoor installations. Technicians benefit from smooth panels that simplify sanitation and reduce maintenance time.
#@@# With Floor#@#
Manufacturers include a factory-installed floor to allow immediate placement of pallets and racks without additional subfloor work. Operations teams gain load-ready capacity and predictable weight distribution for stored products.
#@@# Self-Closing Door#@#
Designers fitted a self-closing door with a locking deadbolt handle to secure inventory and maintain a consistent interior temperature. Staff will reduce cooling loss from open-door incidents and improve safety during shift changes.
#@@# Capsule Pak Refrigeration#@#
The CPF150JC-E-4-EV R449 capsule pak integrates with a self-contained refrigeration system to maintain -10°F under typical load conditions. Maintenance crews access a consolidated service point that shortens repair times and limits downtime.
#@@# Outdoor Rated#@#
Specifiers intended the unit for outdoor installation with a membrane roof and coated finish to shed water and resist weathering. Facility planners avoid costly building modifications while preserving interior temperature stability.
#@@# Energy Supply#@#
Engineers designed the system for 208/230v, 60 hertz, single-phase power to match common commercial electrical infrastructure.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect door gaskets weekly; replace any cracked or deformed sections to maintain a -10°F environment. Clean condenser coils monthly with a soft brush or vacuum to enhance heat exchange and reduce compressor run time. Sanitize the floor and interior panels with a neutral pH detergent; rinse thoroughly and allow to dry before restocking. Verify refrigerant connections and electrical supply during each service; tighten terminals and record voltage at 208/230 volts.
