This strip-style heater is built for high-traffic service lines, ensuring precise holding temperatures while reducing energy waste and service interruptions. Commercial kitchens will benefit from consistent heat across a 60-inch span, enabling operators to keep plates and trays ready without cold spots. The design emphasizes reliability with a robust shell and an accessible control layout for quick adjustments during peak hours.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the 6150-60-DL-208 before cleaning. Remove dust and debris from the aluminum shell with a soft brush, then wipe with a mild detergent and a damp cloth. Clean the infrared element only when cool; avoid abrasive scouring pads. Inspect and wipe the on/off toggle and indicator light with a damp cloth. Check mounting hardware and vents for grease buildup; remove buildup to prevent fires and equipment failure. Dry all surfaces completely before restoring power.#@@#Additional Info#@#Nemco 6150-60-DL-208 Aluminum Shell Bar Heater offers 60" x 15.75" x 2.75" infrared heating with 2960 watts at 208v, 14.2 amps, 60 Hz single-phase power, aluminum shell, toggle switch, cETLus and NSF certifications, and weighs 17 pounds.#@@#General Info#@#Description #@#
This strip-style heater is built for high-traffic service lines, ensuring precise holding temperatures while reducing energy waste and service interruptions. Commercial kitchens will benefit from consistent heat across a 60-inch span, enabling operators to keep plates and trays ready without cold spots. The design emphasizes reliability with a robust shell and an accessible control layout for quick adjustments during peak hours.
Measuring 60 inches wide by 15.75 inches deep and 2.75 inches high, the unit installs in narrow overhead spaces without encroaching on prep areas. Technicians will mount the heater in confined zones to maximize counter and pass-through real estate.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Nemco 6150-60-DL-208 for loose fasteners and damaged wiring; tighten hardware and replace frayed cords immediately. Clean the aluminum shell weekly with a nonabrasive cleaner and soft cloth to prevent corrosion. Remove dust from the infrared element and vents using compressed air while power is disconnected. Verify voltage at 208v and measure current; confirm load draws about 14.2 amps. Test the on/off toggle and indicator lights monthly; replace bulbs or switches if they fail.
