Engineered to integrate with common draft distribution hardware, the unit accepts standard tubing sizes and mounting configurations. Managers can retrofit this pump into existing systems with minimal modification, preserving prior investments.
LongDescription#@#NA#@@#Cleaning Instructions#@#Micro Matic WD-035 Flojet Pump with stainless steel fittings supports draft systems by moving fluids reliably. Clean pump weekly: disconnect power, depressurize lines, detach fittings, flush with warm water, run a mild detergent solution, rinse until clear, sanitize with a food-safe sanitizer per manufacturer instructions, reassemble and test for leaks. Maintain vents and surrounding area to prevent grease buildup and reduce fire risk, ensure CSA-listed wiring and dry components before power-up.#@@#Additional Info#@#Micro Matic WD-035 Flojet Pump with stainless steel fittings ensures consistent beverage transfer at commercial flow rates, supports draft beer systems, and meets CSA safety.#@@#General Info#@#Description #@#
Engineered to integrate with common draft distribution hardware, the unit accepts standard tubing sizes and mounting configurations. Managers can retrofit this pump into existing systems with minimal modification, preserving prior investments.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Service technicians should flush the Micro Matic WD-035 Flojet pump with potable water after each syrup or concentrated wash to prevent clogging and maintain flow rates. Inspect stainless steel fittings weekly for corrosion and tighten connections to 15–20 ft·lbs torque where applicable. Replace diaphragms and check valves every 12 months or sooner under heavy use. Calibrate pressure settings and verify seal integrity during monthly preventive maintenance.
