Stop compromising control for flow. This in-line flow control shut-off installs directly into draft lines for precise fluid regulation and rapid isolation without removing couplers or disrupting service. Designed for commercial draft systems, it preserves product integrity while enabling adjustments and maintenance in high-throughput environments.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the dispenser and relieve line pressure. Remove the Micro Matic WD-024 0.31" in-line flow control shut off. Wipe exterior with a mild detergent and a soft cloth. Flush internal passageways with warm water, then run a food-safe cleaner through the line per manufacturer dilution. Rinse thoroughly until clear. Inspect O-rings and threads; replace worn seals. Reinstall, test for leaks, and pressurize slowly. Clean monthly or per volume of use to maintain safety and performance.#@@#Additional Info#@#Micro Matic WD-024 0.31" in-line flow control regulates draft beer systems, fits 5/16" lines, and allows quick shutoff for maintenance. Stainless fitting reduces foam, controls pour rate, and simplifies service.#@@#General Info#@#Description #@#
Stop compromising control for flow. This in-line flow control shut-off installs directly into draft lines for precise fluid regulation and rapid isolation without removing couplers or disrupting service. Designed for commercial draft systems, it preserves product integrity while enabling adjustments and maintenance in high-throughput environments.
#@@# Inline Flow Control#@#
With a 0.31" orifice, the device stabilizes pour rates across long runs. Technicians observe consistent pressure differentials and predictable output, reducing foam and product waste during peak service.
#@@# Compact Inline Design#@#
The 5/16" form factor fits tight line runs, vertical stacks, or under-rail mounts without reconfiguring hardware. Installers integrate the fitting into polyethylene or vinyl tubing with standard barbed connections, minimizing downtime and labor.
#@@# Positive Shut Off#@#
A manual shut-off isolates dispense network sections for cleaning or keg changeover while maintaining upstream service. Operators prevent cross-contamination and limit product loss during routine tasks and line purges.
#@@# Serviceable Construction#@#
Machined components and accessible seals allow field replacement of wear parts, reducing ownership costs. Maintenance crews perform quick seal swaps and reassembly with basic tools, preserving uptime in high-volume locations.
#@@# Pressure Compatibility#@#
Rated for standard draft pressures, the fitting tolerates operating differentials in bars, cafeterias, hospitals, and universities. Engineers integrate it into systems with regulators and disconnects without compromising calibration.
#@@# Material Compatibility#@#
Constructed for contact with dispensing fluids, the component resists corrosion and maintains stability across sanitation cycles. Facility managers ensure compliance with cleaning schedules and maintain pour quality by selecting durable materials.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic WD-024 0.31" in-line flow control shut off by flushing lines with warm water after each use to prevent sediment buildup. Inspect O-rings monthly and replace at first sign of wear to prevent leaks. Lubricate moving parts with NSF-certified silicone lubricant quarterly. Verify flow adjustment operates smoothly and recalibrate per manufacturer specifications after any service. Record service dates and parts replaced for compliance and traceability.
