Micro Matic WD-008 0.19" I.D. Cold Plate Nipple

LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug draft lines and relieve pressure before handling the Micro Matic WD-008 0.19" I.D. cold plate nipple. Remove the nipple and soak in warm water with food-safe detergent for 10–15 minutes. Scrub with a soft brush to remove beer stone and biofilm. Rinse with potable water and inspect the I.D. for residue; repeat until clear. Sanitize with a CSA-accepted chemical or 170°F water for 30 seconds.#@@#Additional Info#@#Micro Matic WD-008 0.19" I.D. Cold Plate Nipple offers a 3/16" I.D. fitting for beverage systems, ensuring reliable sealing and flow; CSA-listed for draft beer system use in restaurants, bars, schools, and hospitals.#@@#General Info#@#Description #@# Small footprint and consistent specification streamline stocking across multiple locations for chains, universities, hospitals, and large campuses. Procurement teams reduce lead time risk and standardize repair kits across sites.#@@#Delivery Details#@# • Please ensure to handle the product with utmost care. • Check if the product you have received has all the essential parts and accessories. • Make sure to examine the product for damage before signing the delivery receipt. • Contact customer service for delivery concerns. • Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Micro Matic WD-008 0.19" I.D. Cold Plate Nipple weekly for corrosion and clean with a soft brush and mild detergent to remove beerstone. Flush lines with warm water after each service period and perform a chemical sanitation cycle using manufacturer-approved cleaners monthly. Lubricate threads with food-grade lubricant before reassembly. Verify flare and compression fittings for leaks and torque to recommended specifications. Maintain documentation of service intervals.