The combined kit components deliver repeatable performance that aligns with commercial service demands in bars, cafeterias, hospitals, and universities. Procurement professionals obtain a single SKU that covers regulator, fitting, elbow, and shut-off needs, simplifying stocking and replacement procedures.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug water at source and shut off 3/8" inline valve. Remove old fittings and install John Guest 3/8" x 1/2" BSP fitting. Mount 15PSI inline regulator and hose elbow per manufacturer torque specs. Flush line until clear water flows. Check connections for leaks and tighten as needed. Sanitize rinser with food-safe sanitizer, rinse, and dry. Schedule routine checks to prevent grease buildup, equipment failures, and failed inspections.#@@#Additional Info#@#Micro Matic RDT-KIT Glass Rinser Install Kit includes a 15 PSI water regulator, a John Guest 3/8" x 1/2" BSP fitting, a hose elbow, and a 3/8" shut-off for easy installation and reliable water control in bars and beverage stations.#@@#General Info#@#Description #@#
The combined kit components deliver repeatable performance that aligns with commercial service demands in bars, cafeterias, hospitals, and universities. Procurement professionals obtain a single SKU that covers regulator, fitting, elbow, and shut-off needs, simplifying stocking and replacement procedures.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic RDT-KIT Glass Rinser Install Kit by inspecting the 15PSI in-line water regulator monthly and replacing if pressure fluctuates. Flush supply lines weekly to remove sediment and prevent nozzle clogging. Remove and clean the John Guest 3/8" x 1/2" BSP fitting and hose elbow with mild detergent; rinse thoroughly and air dry before reassembly. Operate the 3/8" in-line shut-off to verify leak-free seals after reinstallation.
