Stop sacrificing flow control for simplicity. This reducing elbow connector delivers compact routing and reliable sealing for draft lines and fluid systems while minimizing pressure drop and installation time. Professionals in food service and hospitality gain precise tubing transitions and consistent service performance from a component engineered for routine use.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and cool it fully before cleaning. Remove detachable parts and wash with warm, soapy water; rinse and dry thoroughly. Use a mild detergent and a soft brush on tubing and fittings like the Micro Matic PI211008S to remove biofilm. Sanitize food-contact surfaces with an approved CSA solution per label; follow contact time. Clean vents, coils, and grease traps weekly to reduce fire risk and improve efficiency. Inspect seals and replace worn parts promptly.#@@#Additional Info#@#Micro Matic PI211008S John Guest elbow connector provides a 90-degree transition from 5/16" to 1/4" tubing for beverage systems. It's compatible with push-fit fittings, corrosion-resistant, and CSA approved for commercial use.#@@#General Info#@#Description #@#
Stop sacrificing flow control for simplicity. This reducing elbow connector delivers compact routing and reliable sealing for draft lines and fluid systems while minimizing pressure drop and installation time. Professionals in food service and hospitality gain precise tubing transitions and consistent service performance from a component engineered for routine use.
#@@# Push-Fit Design#@#
This connector features a push-fit gland that locks tubing instantly, enabling fast installations without clamps or soldering. Technicians reduce downtime and complete line changes with repeatable connections that maintain line integrity under standard draft pressures.
#@@# Dual Size Transition#@#
This elbow transitions 5/16 inch tubing to 1/4 inch tubing while maintaining a smooth internal profile, which lowers turbulence and preserves flow rate. Operators maintain accurate dispense volumes and reduce foaming or flow fluctuations common with abrupt diameter changes.
#@@# 90 Degree Routing#@#
The angled configuration creates a compact 90-degree turn that optimizes space behind bars and in service cabinets. Installers navigate tight layouts and avoid sharp kinks that compromise line life, promoting serviceability in confined footprints.
#@@# Material Compatibility#@#
Manufacturers specify materials suitable for contact with potable liquids and refrigeration applications, supporting line longevity and sanitary performance. Managers reduce contamination risk and align component selection with existing tubing and fittings used in draft systems.
#@@# Serviceable Connection#@#
The connector allows quick disassembly for cleaning or replacement without specialized tools, enabling scheduled maintenance and swift part swaps. Maintenance crews shorten service windows and preserve system uptime during peak shifts.
#@@# Pressure Performance#@#
Design tolerances support typical dispensing system pressures, ensuring consistent seals and minimal leaks under normal operating conditions.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic PI211008S John Guest reducing elbow connector by inspecting fittings for wear weekly and replacing seals at first sign of hardening. Flush connected tubing with warm water after daily use and use food-grade sanitizer per CSA guidelines during scheduled deep cleans. Lubricate O-rings with approved silicone grease before reassembly and torque fittings to manufacturer specifications to prevent leaks and maintain flow performance.
