Stop compromising flow for control. This stainless steel draft cooler delivers commercial-grade cooling, secure keg handling, and service-friendly maintenance, allowing operators to maintain steady pours during peak hours. Designed for back bars, event tents, and high-traffic outlets, this unit balances capacity with a compact 25-inch footprint and robust refrigeration components for reliable daily performance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and remove keg. Empty drip tray and wash with warm, soapy water; rinse and dry. Clean stainless steel exterior and interior floor with non-abrasive detergent and soft cloth. Inspect and clean condenser coils every 3 months using a brush or vacuum to improve efficiency. Flush drain bottle and hose; sanitize surfaces that contact beer. Check door gasket for wear and replace if damaged. Reconnect power only after unit is fully dry.#@@#Additional Info#@#Micro Matic's MDD23S-E-LT Pro-Line E-Series draft cooler offers 8.4 cu. ft. capacity, stainless steel interior/exterior, 1/6 HP R-134a compressor, 115v/60/1-ph at 2.5 amps, casters, keg slide, analog thermostat, cETLus, and ETL-Sanitation listings.#@@#General Info#@#Description #@#
Stop compromising flow for control. This stainless steel draft cooler delivers commercial-grade cooling, secure keg handling, and service-friendly maintenance, allowing operators to maintain steady pours during peak hours. Designed for back bars, event tents, and high-traffic outlets, this unit balances capacity with a compact 25-inch footprint and robust refrigeration components for reliable daily performance.
#@@# Capacity Management#@#
This cooler holds 8.4 cu. ft. and accepts 1/2 barrel kegs, enabling one to two full kegs depending on configuration and coupler choice. Facility managers gain predictable run times and straightforward keg swaps thanks to the integrated keg slide and stainless steel floor.
#@@# Cooling Performance#@#
The self-contained refrigeration system uses R-134a and a 1/6 HP compressor to maintain consistent draft temperatures under 115 volts, 60 hertz, single-phase power. Operators achieve stable dispense conditions with a 2.5 amp draw and an analog dial thermostat for simple setpoint adjustments.
#@@# Sanitation And Compliance#@#
The unit carries ETL-Sanitation and cETLus listings, supporting health code inspections and institutional purchasing requirements. Staff can access the stainless steel interior and removable drip grill for regular cleaning and safe handling of lines and couplers.
#@@# Serviceability And Installation#@#
Technicians benefit from an automatic condensate evaporator and standard NEMA 5-15P plug for straightforward connection in most commercial electrical layouts. Design features such as casters and a flat top with a glass guard rail simplify placement, mobility, and installation of remote tapping components.
#@@# Security And Durability#@#
A solid hinged door with a lock protects inventory while minimizing temperature loss during service intervals. Constructed with stainless steel exterior and interior elements, the cooler resists corrosion in high-use bar environments and stands up to frequent cleaning.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Clean condenser coils monthly to maintain 115v compressor efficiency and prevent heat buildup. Inspect door gasket weekly; replace if tears or loss of seal occur. Sanitize stainless steel interior and removable drip tray after each service using mild detergent and warm water; rinse and dry to avoid corrosion. Verify thermostat accuracy quarterly and confirm condensate evaporator function. Tighten caster hardware and check electrical plug for wear regularly.
