Stop losing temperature control in draft lines. This flexible insulation jacket surrounds 1.04-inch inside diameter tubing with a 0.75-inch wall, reducing thermal transfer and preserving product condition across runs. Professionals gain consistent line temperature over 6-foot sections without adding significant bulk to routing paths.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug draft lines and remove fittings. Wipe insulation with a mild detergent and warm water, scrub seams with a soft brush, rinse thoroughly, and air dry. Inspect for cracks or compression and replace damaged sections. Clean surrounding refrigeration coils and vents to prevent grease buildup and fire risk. Maintain documented cleaning intervals to reduce equipment wear, lower energy use, and ensure CSA compliance.#@@#Additional Info#@#Micro Matic ES-FRI138 insulation has a 1.04" inside diameter and 0.75" wall in 6 ft lengths. It uses lightweight foam to reduce thermal transfer and condensation on draft beer lines.#@@#General Info#@#Description #@#
Stop losing temperature control in draft lines. This flexible insulation jacket surrounds 1.04-inch inside diameter tubing with a 0.75-inch wall, reducing thermal transfer and preserving product condition across runs. Professionals gain consistent line temperature over 6-foot sections without adding significant bulk to routing paths.
#@@# Flexible Insulation#@#
Engineers chose closed cell foam to deliver low thermal conductivity while maintaining pliability for tight bends. Technicians can compress and contour the jacket around complex runs without kinking, ensuring continuous coverage that limits heat gain.
#@@# Precise Fit#@#
Manufactured for a 1-3/8 inch inside dimension, it provides a near-contact fit on 1.04-inch inner diameter tubing, minimizing air gaps that accelerate warming. Installers secure consistent insulation thickness across the entire 6-foot length to stabilize downstream dispensing performance.
#@@# Durable Construction#@#
Proven closed cell composition resists moisture absorption and degradation in refrigerated environments, reducing the risk of microbial ingress. Maintenance crews experience fewer replacements and less downtime compared with open cell alternatives.
#@@# Thermal Performance#@#
Measured wall thickness of 0.75 inch delivers a measurable reduction in thermal flux along chilled lines, helping systems hold setpoints under variable ambient loads. Facility managers observe improved pull rates from dispensers with reduced sweating and condensation on runs.
#@@# Ease of Installation#@#
Lightweight 6-foot sections simplify staging and handling during retrofits and new builds, enabling teams to run longer continuous lengths without additional joints. Field staff cut and fit sections quickly using standard tools, accelerating project timelines.
#@@# System Compatibility#@#
Designed for draft system applications, the material integrates with commonly used couplers, distributors, and regulators without interfering with fittings.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect insulation on draft lines weekly and replace any segments with compression, cracks, or discoloration to prevent thermal loss. Use gloves and eye protection when handling closed-cell foam, cutting with a sharp utility knife for clean edges. Clean surfaces with mild detergent; avoid solvents that degrade foam. Ensure 6-foot lengths fit tubing with a 1.04" inside diameter and 0.75" wall thickness; secure joints with CSA-approved tape or adhesive.
