Stop sacrificing draft quality for capacity. This glycol-cooled double pedestal tap tower delivers consistent draft temperature control while supporting high-throughput service with ten faucets, enabling sustained pour rates without flavor degradation. Operators maintain cold product lines and stable foam control through an integrated Kool-Rite™ cooling module and copper coolant plumbing.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and drain glycol per instructions. Remove faucets; soak in warm, soapy water, brush interiors, and rinse. Wipe tower exterior and bases with non-abrasive cleaner; clean product lines and shanks. Inspect gaskets, hardware, and cooling block; replace worn seals. Clean vents and coils to maintain efficiency and reduce fire risk. Dry all parts before reassembly and restore power.#@@#Additional Info#@#Micro Matic's DPT410PVDKR draft tower offers glycol-cooled dispensing with a Kool-Rite™ module, ten brass-plated faucets, stainless lines, leak-proof shanks, a cooling block, 30" width, 11-5/8" clearance, countertop mounting, and NSF certification.#@@#General Info#@#Description #@#
Stop sacrificing draft quality for capacity. This glycol-cooled double pedestal tap tower delivers consistent draft temperature control while supporting high-throughput service with ten faucets, enabling sustained pour rates without flavor degradation. Operators maintain cold product lines and stable foam control through an integrated Kool-Rite™ cooling module and copper coolant plumbing.
#@@# Cooling Module#@#
Integrated glycol cooling maintains product line temperatures at service setpoints, reducing oxidation and preserving head retention. The Kool-Rite™ module connects to copper coolant lines and a cooling block to provide closed-loop temperature management across all faucets.
#@@# Ten Faucet Capacity#@#
Ten PVD-plated brass faucets expand service lanes for simultaneous dispensing across high-volume outlets. The 11-5/8 inches of faucet clearance accommodates tall glassware and pitchers, minimizing spill risks during peak periods.
#@@# Stainless Product Lines#@#
Stainless steel product lines and leak-proof shanks ensure sanitary flow paths and reduce contamination risk. The durable tubing resists corrosion from cleaning cycles and glycol exposure, lowering replacement frequency.
#@@# Countertop Mounting#@#
Countertop mounting with supplied gaskets and hardware enables straightforward installation on existing bars and backbars. The 3-inch on-center spacing and included bases simplify alignment and secure attachment to work surfaces.
#@@# Brass Finish Durability#@#
PVD brass-plated columns and bases provide corrosion resistance and maintain a professional appearance in high-use environments. The finish withstands frequent cleaning while offering a cohesive look with traditional bar fittings.
#@@# Compact Footprint#@#
At 30 inches wide and 15.56 inches high, the double pedestal configuration maximizes faucet density while conserving counter space. Two 4-inch diameter columns with 6-inch diameter bases distribute weight and allow access behind the tower for service.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic DPT410PVDKR by flushing glycol lines weekly to prevent biofilm and maintain cooling efficiency. Inspect PVD brass surfaces daily and wipe with a soft cloth and mild, pH-neutral cleaner; avoid abrasive pads. Tighten faucet shanks and check for leaks at joints monthly; replace worn gaskets immediately. Sanitize product lines after prolonged idle periods using manufacturer-approved cleaners. Schedule annual CSA-compliant service for cooling module calibration.
