Micro Matic’s 48" stainless steel wall-mount drip tray streamlines dispensing stations by collecting spills and protecting wall surfaces while supporting high-throughput service environments. Designed for commercial bars, cafeterias, and beverage counters, this unit balances capacity and footprint to minimize maintenance intervals and preserve sanitation standards.
Stainless Steel Construction
Fabricated from stainless steel, the tray resists corrosion and stands up to daily cleaning protocols common in foodservice and hospital settings. The durable surface maintains structural integrity under frequent use and simplifies sanitization procedures.
Wall Mount Design
Mounting directly to the wall reduces counter clutter and frees workspace for service tasks and equipment placement. Installation lowers the risk of accidental displacement and creates a consistent drain path for captured liquids.
Fourteen Drain Holes
Equipped with fourteen holes, the tray distributes flow to prevent pooling and reduces backflow risk during peak service. The pattern supports rapid evacuation of liquids into a connected drain or reservoir.
Optimized Width Range
Offering a usable width in the 37"–48" range, the tray accommodates multiple dispense points across a single run to match varied station layouts. The span supports common tap configurations without requiring custom fabrication.
Low Profile Depth
With a depth of 6.38 inches, the unit provides substantial containment capacity while maintaining a low visual profile and unobtrusive presence behind counters. That depth limits splash beyond the tray during routine service.
Commercial Weight Rating
Weighing approximately 15 pounds, the tray balances robustness with straightforward handling during installation and servicing. The mass indicates solid construction while allowing technicians to mount or remove the unit without heavy equipment.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe tray with a mild detergent solution and a soft cloth, removing pooled liquid from the 14 drain holes; rinse and dry to prevent water spots and corrosion. Sanitize high-touch zones—front edge and mounting brackets—after peak service to prevent germ transfer between front- and back-of-house. Inspect wall anchors and seams weekly for residue that attracts pests; remove spills immediately to protect finishes and extend service life.#@@#Additional Info#@#Micro Matic DP-332ELD-14-3-P is a 48" wall-mount stainless steel drip tray with 14 drain holes, 37"–48" length options, 6.38" depth, and 15-pound weight, ideal for beverage stations and bars.#@@#General Info#@#Description #@#
Micro Matic’s 48" stainless steel wall-mount drip tray streamlines dispensing stations by collecting spills and protecting wall surfaces while supporting high-throughput service environments. Designed for commercial bars, cafeterias, and beverage counters, this unit balances capacity and footprint to minimize maintenance intervals and preserve sanitation standards.
Stainless Steel Construction
Fabricated from stainless steel, the tray resists corrosion and stands up to daily cleaning protocols common in foodservice and hospital settings. The durable surface maintains structural integrity under frequent use and simplifies sanitization procedures.
Wall Mount Design
Mounting directly to the wall reduces counter clutter and frees workspace for service tasks and equipment placement. Installation lowers the risk of accidental displacement and creates a consistent drain path for captured liquids.
Fourteen Drain Holes
Equipped with fourteen holes, the tray distributes flow to prevent pooling and reduces backflow risk during peak service. The pattern supports rapid evacuation of liquids into a connected drain or reservoir.
Optimized Width Range
Offering a usable width in the 37"–48" range, the tray accommodates multiple dispense points across a single run to match varied station layouts. The span supports common tap configurations without requiring custom fabrication.
Low Profile Depth
With a depth of 6.38 inches, the unit provides substantial containment capacity while maintaining a low visual profile and unobtrusive presence behind counters. That depth limits splash beyond the tray during routine service.
Commercial Weight Rating
Weighing approximately 15 pounds, the tray balances robustness with straightforward handling during installation and servicing. The mass indicates solid construction while allowing technicians to mount or remove the unit without heavy equipment.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Please perform routine maintenance on the Micro Matic DP-332ELD-14-3-P drip tray for consistent operation and sanitation. Clean stainless steel daily with mild detergent and warm water; rinse thoroughly. Inspect 14 hole inserts weekly for blockages; clear with a soft brush. Check wall-mount fasteners monthly and tighten if loose. Sanitize interior surfaces after deep cleaning. Inspect seals and welds quarterly, replacing damaged parts to prevent leaks.
