Handle high-volume draft operations with a glycol-cooled tap tower engineered for continuous service and precise temperature control. This modular insert accommodates 14 faucets across a 42-inch span, enabling rapid product changeover while maintaining consistent dispense temperature. Food service teams will reduce spoilage and maintain flavor integrity through active glycol cooling and robust stainless steel construction.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug cooling lines before service and drain glycol to prevent spills. Remove faucets and soak in warm, soapy water; brush ports and rinse. Clean 304 stainless shanks with non-abrasive cleaner and a soft cloth. Flush product lines with approved sanitizer per CSA guidelines. Inspect seals and copper coolant lines; replace damaged parts. Clean condenser and vents to maintain efficiency and reduce fire risk. Dry all components fully before reassembly and power-up.#@@#Additional Info#@#Micro Matic’s 1738-L glycol-cooled tap module mounts on walls and delivers 14 stainless steel faucets with 2.63" leak-proof shanks; NSF-certified draft cooling for commercial beverage operations.#@@#General Info#@#Description #@#
Handle high-volume draft operations with a glycol-cooled tap tower engineered for continuous service and precise temperature control. This modular insert accommodates 14 faucets across a 42-inch span, enabling rapid product changeover while maintaining consistent dispense temperature. Food service teams will reduce spoilage and maintain flavor integrity through active glycol cooling and robust stainless steel construction.
#@@# Stainless Shanks#@#
2.63-inch leak-proof stainless shanks provide direct, sanitary product transfer from kegs to faucets. Installers benefit from 3-inch on-center spacing that simplifies alignment and speeds field replacement.
#@@# Fourteen Faucets#@#
Fourteen 304 stainless faucets allow simultaneous service across multiple lines, increasing throughput during peak periods. Operators gain flexibility to run varied selections without rerouting or juggling lines.
#@@# Glycol Cooling#@#
Glycol-cooled design circulates coolant through copper lines to preserve low dispense temperatures under heavy load. Technicians observe stable product temperatures that reduce foaming and extend time on tap.
#@@# Modular Insert#@#
Kool-Rite insert module fits the 42-inch column and includes a cooling block for simplified integration. Maintenance crews access internal components quickly, lowering downtime during service intervals.
#@@# Stainless Lines#@#
Full stainless steel product lines resist corrosion and simplify sanitation procedures in regulated environments. Cleaning teams complete routine washdowns faster and meet NSF standards for draft installations.
#@@# Wall Mounting#@#
Wall mount configuration secures the tower in space-constrained back bars and service areas. Managers reclaim counter surface while keeping faucets ergonomically positioned for staff.
Company history supports long-term availability and parts support since 1998, and NSF certification verifies compliance with public health standards.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect glycol lines weekly and purge air to maintain consistent cooling and prevent foam buildup. Calibrate coolant concentration to manufacturer specifications and measure temperature at the cooling block to verify performance. Sanitize faucets and shanks daily with approved detergent, then rinse thoroughly. Lubricate seals quarterly and replace worn gaskets immediately. Secure wall mounts and tighten fittings during monthly inspections to avoid leaks and service interruptions.
