This add-on kit is designed to enhance existing storage lines, converting single shelving runs into continuous, load-ready systems without wasted uprights or uneven spacing. Installers can assemble the components on site, ensuring consistent alignment with existing units.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment before cleaning. Remove loose debris with a brush, then wipe surfaces with a mild detergent solution and a soft cloth. Rinse with clean water and dry completely to prevent corrosion. Degrease ovens and vents with an approved solvent; scrub coils on refrigeration units and clear debris to improve efficiency. Inspect seals and hardware; tighten or replace damaged parts. Record cleaning dates to meet CSA and inspection standards.#@@#Additional Info#@#Metro SM761824-ADD SmartLever kit fits 24"×18" Metro shelves and includes a 26.19"W ×22.5"D ×76.38"H epoxy-coated steel upright, leg, two cross braces, two cross bars, and hardware; NSF certified, 42.42 pounds, for commercial shelving expansion.#@@#General Info#@#Description #@#
This add-on kit is designed to enhance existing storage lines, converting single shelving runs into continuous, load-ready systems without wasted uprights or uneven spacing. Installers can assemble the components on site, ensuring consistent alignment with existing units.
The kit includes an upright that integrates seamlessly with 24 inch by 18 inch Metro shelves, maintaining rack alignment and load distribution. Technicians can quickly set the upright to achieve structural continuity across the storage run.
A leg provides necessary floor support, reducing deflection under stacked loads. Installers can position the leg to match existing adjustable-height systems, ensuring level shelving.
Two braces secure lateral stability and help control racking forces during handling and stocking operations. Field crews can bolt the braces between uprights to restore rigidity similar to standalone units.
Two bars create support points for shelves and help resist sagging when loaded. Field teams can attach the bars to the upright and brace system to maintain uniform shelf planes.
The steel used in this kit is resistant to corrosion and moisture, making it suitable for kitchen, storage, and prep environments. Maintenance staff can clean surfaces with standard sanitizers without damaging the material.
This kit is certified for use in commercial foodservice settings, addressing regulatory requirements and simplifying approval processes during inspections. Managers can document compliance and integrate the add-on into certified storage layouts.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect epoxy-coated steel components monthly and tighten all fasteners to maintain load integrity. Clean surfaces with a neutral pH detergent and warm water; rinse thoroughly and dry to prevent corrosion. Verify uprights remain plumb and level; adjust legs to redistribute loads evenly. Replace worn or bent cross braces immediately. Follow NSF cleaning agents and avoid chloride-based cleaners. Document maintenance actions and load limits to ensure safe, continuous operation.