Eliminate space constraints for enhanced kitchen operations with the Metro MS1836-FGFG PrepMate MultiStation!
The Metro MS1836-FGFG PrepMate MultiStation is a multi-level and multifunctional workstation. It presents a multi-rail construction. It is made from 16-gauge, type 304 stainless-steel. Meanwhile, the end caps are made from glass-filled nylon. It can accommodate to a standard 18 inches by 24 inches cutting board above standard food or steam table pans. This design provides an accessible storage level below the work surface, which increases its capacity. This also streamlines the process of pushing prepared food into pans to increase productivity by up to 20%. Additionally, it is equipped with rail grips. This prevents the cutting board from sliding on the rails.
The Metro MS1836-FGFG PrepMate MultiStation has nominal dimensions of 18 inches by 36 inches. Meanwhile, it has actual dimensions of 19.4 inches by 38 inches. It offers five (5) work surface heights from 35-1/8 inches to 39 to 1/8 inches. It is adjustable in 1-inch increments to allow set-up of work station based on the heights and tasks of operators. It is also designed after the Metro Super Erecta commercial grade shelving systems. It features two (2) solid galvanized shelves. Each shelf has a load capacity of 800 pounds. It comes with chrome posts as well. It features 1-inch grooves to allow adjustment of shelves for efficient use of space.
To perform a multitude of tasks more efficiently, the Metro MS1836-FGFG PrepMate MultiStation is provided with four (4) casters. This allows the operator to perform tasks anywhere and transport items with ease. It is also designed with total lock to secure both the caster wheel and the hub in position for maximum stability. Each caster has a diameter of 5 inches. Meanwhile, it has a 3/8-inch threaded stem. It is made from polyurethane. It also has horns made from polyester. Consisting of rails, shelves, posts, and casters, it has a weight of 61.98 pounds.
LongDescription#@#NA#@@#Cleaning Instructions#@#To clean the Metro MS1836-FGFG PrepMate MultiStation, simply follow the 4-step process: clean, rinse, sanitize, and air dry. Take the rails apart in a dishwasher or sink for periodic deep cleaning. Kindly refer to the manufacturer’s manual for detailed instructions. After cleaning, rinse thoroughly with a hose or low-pressure power washer. Be mindful of the intermittent exposure temperature limit of 200 degrees Fahrenheit. Next, apply sanitizer on all surfaces for enhanced protection. Finally, let it dry.#@@#Additional Info#@#The Metro MS1836-FGFG PrepMate MultiStation is listed by NSF.#@@#General Info#@#Eliminate space constraints for enhanced kitchen operations with the Metro MS1836-FGFG PrepMate MultiStation!
The Metro MS1836-FGFG PrepMate MultiStation is a multi-level and multifunctional workstation. It presents a multi-rail construction. It is made from 16-gauge, type 304 stainless-steel. Meanwhile, the end caps are made from glass-filled nylon. It can accommodate to a standard 18 inches by 24 inches cutting board above standard food or steam table pans. This design provides an accessible storage level below the work surface, which increases its capacity. This also streamlines the process of pushing prepared food into pans to increase productivity by up to 20%. Additionally, it is equipped with rail grips. This prevents the cutting board from sliding on the rails.
The Metro MS1836-FGFG PrepMate MultiStation has nominal dimensions of 18 inches by 36 inches. Meanwhile, it has actual dimensions of 19.4 inches by 38 inches. It offers five (5) work surface heights from 35-1/8 inches to 39 to 1/8 inches. It is adjustable in 1-inch increments to allow set-up of work station based on the heights and tasks of operators. It is also designed after the Metro Super Erecta commercial grade shelving systems. It features two (2) solid galvanized shelves. Each shelf has a load capacity of 800 pounds. It comes with chrome posts as well. It features 1-inch grooves to allow adjustment of shelves for efficient use of space.
To perform a multitude of tasks more efficiently, the Metro MS1836-FGFG PrepMate MultiStation is provided with four (4) casters. This allows the operator to perform tasks anywhere and transport items with ease. It is also designed with total lock to secure both the caster wheel and the hub in position for maximum stability. Each caster has a diameter of 5 inches. Meanwhile, it has a 3/8-inch threaded stem. It is made from polyurethane. It also has horns made from polyester. Consisting of rails, shelves, posts, and casters, it has a weight of 61.98 pounds.#@@#Delivery Details#@#• Upon receiving your Metro MS1836-FGFG PrepMate MultiStation, carefully inspect it for shipping damages. If any damages are found, kindly make a claim about it with the freight carrier. Also, have the product marked as “damaged” on their copy of the freight bill.
• Before assembly, check all components to see if they are complete. Kindly refer to the manufacturer’s manual for detailed assembly instructions.#@@#deliverynotes#@#The Metro MS1836-FGFG PrepMate MultiStation is usually shipped within # business days after receiving cleared payment.#@@#Maintenance Guide#@#Follow proper use and care to preserve the Metro MS1836-FGFG PrepMate MultiStation at its best condition. Clean and sanitize the rails after each use. Apply appropriate cleaners with soft sponge or towel only. Do not use abrasive cleaners and harsh chemicals. Also, do not use stiff brushes and scouring pads to avoid damages.