Engineers provided a 4 inch height and a 12 pound weight specification for planning mounting and support requirements in draft systems and chillers. Maintenance staff calculate torque and bracket needs accurately prior to installation.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and empty the dispenser. Remove the Krowne BC-325 faucet and soak in warm water with a mild degreaser for 10 minutes. Scrub flow passages with a soft brush, flush with clean water, and air dry. Wipe exterior satin stainless steel with a soft cloth and non-abrasive cleaner. Inspect seals and fittings for wear; replace if damaged. Clean surrounding drip trays and vents weekly to prevent grease buildup, reduce fire risk, and maintain sanitary food contact surfaces.#@@#Additional Info#@#Krowne BC-325 MasterTap ensures controlled beverage flow with a stainless steel finish, 3.44" length, and 12 pounds weight; CSA-certified construction resists corrosion and integrates with commercial draft systems for reliable service.#@@#General Info#@#Description #@#
Engineers provided a 4 inch height and a 12 pound weight specification for planning mounting and support requirements in draft systems and chillers. Maintenance staff calculate torque and bracket needs accurately prior to installation.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Upon confirmation of completed payment, Culinary Depot will ship/deliver the Krowne BC-325 Flow Control Beer Faucet.#@@#Maintenance Guide#@#Inspect the Krowne BC-325 faucet weekly for mineral buildup and corrosion. Remove the aerator and soak it in a 1:1 solution of white vinegar and water for 20 minutes, then brush with a soft nylon brush. Lubricate moving seals with food-grade silicone grease every three months and replace worn O-rings. Flush lines with potable water before service after disassembly. Tighten mounting hardware to the manufacturer’s specifications.
