Stop sacrificing storage efficiency for temperature control. This indoor walk-in cooler delivers consistent medium-temperature performance while fitting into constrained kitchen footprints, providing reliable remote refrigeration with factory-precharged capability. Designed for commercial food service operations, it supports continuous use with durable galvalume panels and certifications from NSF, cUL, and UL.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the cooler and remove all product. Mix mild detergent with warm water and wipe interior panels, shelves, and door gaskets with a soft cloth. Scrub condenser coils with a coil brush every 3 months to maintain efficiency. Clean drain lines with enzymatic cleaner weekly to prevent clogs. Rinse surfaces, dry thoroughly, and inspect seals for wear; replace as needed. Follow CSA and UL guidelines and reconnect power only when dry.#@@#Additional Info#@#Kolpak KFX8-0814-CR indoor cooler: 102" H x 93" W x 162" D, floorless for flexible finishes, medium temp at +35°F with R-404A, 208/230 volts, 26 gauge galvalume, 4" vinyl/foam screeds, 2" thermometer, NSF/UL listed, 1951 lbs, B2B since 1998.#@@#General Info#@#Description #@#
Stop sacrificing storage efficiency for temperature control. This indoor walk-in cooler delivers consistent medium-temperature performance while fitting into constrained kitchen footprints, providing reliable remote refrigeration with factory-precharged capability. Designed for commercial food service operations, it supports continuous use with durable galvalume panels and certifications from NSF, cUL, and UL.
#@@# Size Optimization#@#
This unit measures 102 inches high, 93 inches wide, and 162 inches deep, providing significant usable volume in a compact nominal footprint of 8' by 14'. Restaurants and institutional kitchens gain organized cold storage without reallocating valuable floor space.
#@@# Thermal Performance#@#
The cooler maintains medium temperature at +35°F using R-404A refrigerant in a remote refrigeration configuration to reduce in-room heat and noise. Operators achieve stable product temperatures while placing the condensing unit outdoors or in a mechanical room.
#@@# Panel Construction#@#
Fabricated with 26-gauge embossed galvalume on both interior and exterior faces, the panels resist corrosion and facilitate cleaning. Maintenance crews will reduce downtime thanks to robust surfaces and simplified sanitation procedures.
#@@# Floorless Design#@#
The floorless configuration allows installation over existing floors and drains, accelerating retrofit projects and preserving finish flooring. Facilities avoid full demolition and can route services beneath the cooler for efficient plumbing and drainage.
#@@# Instrumentation Package#@#
The cooler includes a 2-inch dial thermometer for immediate temperature verification and 4-inch vinyl/foam screeds to seal the base perimeter. Staff perform routine checks quickly and maintain air seals to limit infiltration.
#@@# Certifications and Power#@#
This unit carries NSF, cUL, and UL approvals and accepts 208/230 volts for electrical connections, ensuring compliance with commercial code requirements.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils weekly; remove dust with a soft brush or vacuum for thermal transfer. Sanitize interior panels with a mild detergent solution and rinse; avoid bleach on Galvalume. Verify door gaskets monthly for compression; replace torn seals immediately to prevent air infiltration. Level and secure floorless base per installation guidelines to avoid panel stress. Log temperature readings from the 2" dial thermometer daily and service the R-404A remote refrigeration system as scheduled.