Stop sacrificing storage capacity for precise temperature control. This indoor walk-in cooler combines robust construction with engineered refrigeration to support high-volume operations while maintaining consistent medium-temperature performance. Food service managers and facilities teams will find a turnkey solution that integrates remote refrigeration, durable finishes, and serviceable components for daily use.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and remove all inventory. Wipe interior panels and door gasket with a mild detergent solution; rinse and dry. Clean condenser coils monthly with a brush or vacuum to improve efficiency and reduce energy use. Degrease ventilated areas and exhausts to lower fire risk. Sanitize food-contact surfaces with an NSF-approved sanitizer to remove pathogens. Inspect seals and replace worn parts to prevent failures and help pass CSA and health inspections.#@@#Additional Info#@#Kolpak's KFX7-0810-CR indoor cooler is 90" H x 93" W x 116" D, operates at 208/230 volts with R-404A refrigeration. It has 26-gauge galvalume panels, maintains +35°F, includes a 2" thermometer, and is NSF, cUL, and UL certified.#@@#General Info#@#Description #@#
Stop sacrificing storage capacity for precise temperature control. This indoor walk-in cooler combines robust construction with engineered refrigeration to support high-volume operations while maintaining consistent medium-temperature performance. Food service managers and facilities teams will find a turnkey solution that integrates remote refrigeration, durable finishes, and serviceable components for daily use.
#@@# Interior Construction#@#
The unit uses 26 gauge embossed galvalume on interior and exterior surfaces to resist corrosion and simplify cleaning. Installers receive a consistent panel finish that supports frequent washdowns and reduces maintenance time.
#@@# Size And Footprint#@#
The cooler measures 90 inches high by 93 inches wide by 116 inches deep, yielding internal volume suited for large inventory storage without expanding facility footprint. Planners can optimize kitchen flow because the floorless design allows existing flooring and drainage to remain intact.
#@@# Temperature Performance#@#
The system operates at a medium temperature set point near +35°F and ships pre-charged for remote refrigeration with R-404A refrigerant. Maintenance teams benefit from the remote configuration because they can locate condensing equipment outside critical workspaces to reduce heat and noise.
#@@# Certifications And Compliance#@#
NSF, cUL, and UL listings confirm compliance with third-party safety and sanitation standards for commercial refrigeration. Purchasing agents obtain documented conformance that supports inspections and food safety programs.
#@@# Controls And Monitoring#@#
A two-inch dial thermometer provides direct readout of internal temperature for routine verification and recordkeeping. Technicians can perform quick visual checks and calibrate controls as part of preventive maintenance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect door gaskets weekly and replace damaged seals to maintain consistent +35F hold. Clean condenser coils monthly with a soft brush and low-pressure air to preserve heat exchange efficiency. Sanitize interior panels and shelves with mild detergent; rinse and dry to prevent corrosion on galvalume surfaces. Verify thermostat calibration quarterly and log temperatures. Schedule qualified technician service annually for refrigerant R-404A system checks and electrical 208/230v inspection.