Stop compromising functionality for convenience. This indoor walk-in cooler provides controlled medium-temperature storage and a robust, service-ready design that supports continuous operations in schools, hospitals, bars, and high-volume kitchens. Engineered for modular installation with a remote refrigeration system, the unit balances thermal performance, sanitary surfaces, and field serviceability to minimize downtime and safeguard inventory.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove all stored food. Wipe interior walls with a mild detergent and warm water using a soft cloth. Scrub the Era floor panels with non-abrasive cleaner, rinse and dry. Clean condenser coils and condenser area to remove dust and grease; check R-404A remote lines for leaks. Inspect door gaskets and thermometer; replace worn seals. Degrease vents and exhausts to reduce fire risk. Schedule routine cleaning to prevent contamination, lower energy use, and avoid equipment failure.#@@#Additional Info#@#Kolpak's KF8-0812-CR indoor cooler is 102" H x 93" W x 139" D, offers medium-temperature (+35°F) storage, and uses R-404A refrigeration at 208/230 volts.#@@#General Info#@#Description #@#
Stop compromising functionality for convenience. This indoor walk-in cooler provides controlled medium-temperature storage and a robust, service-ready design that supports continuous operations in schools, hospitals, bars, and high-volume kitchens. Engineered for modular installation with a remote refrigeration system, the unit balances thermal performance, sanitary surfaces, and field serviceability to minimize downtime and safeguard inventory.
#@@# Size and Footprint#@#
This cooler measures 102 inches high by 93 inches wide and 139 inches deep, offering a clear usable interior for standardized shelving and pallet storage. Operators benefit from a predictable footprint that fits common kitchen and service back-of-house layouts while maximizing cubic capacity within an 8-foot nominal short side and 12-foot nominal long side configuration.
#@@# Temperature Control System#@#
The system targets medium temperature performance at approximately +35°F and ships pre-charged for indoor/outdoor remote operation using R-404A refrigerant. Facilities leverage the remote refrigeration design to isolate noise and heat loads away from service areas while maintaining consistent thermal regulation for perishable stock.
#@@# Construction Material#@#
Panels feature 26-gauge embossed galvalume on both interior and exterior surfaces to resist corrosion and simplify cleaning procedures. Maintenance teams benefit from long-term surface durability and a finish that meets commercial sanitation protocols without frequent refinishing.
#@@# Flooring Specification#@#
The unit includes an Era floor constructed from .10 smooth aluminum, providing a continuous, low-profile walking surface that supports foot traffic and rolling carts. Kitchen staff enjoy a corrosion-resistant substrate that resists moisture intrusion and eases daily washdown tasks.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils monthly; remove debris with a soft brush and vacuum to maintain heat exchange. Verify door gaskets weekly for tears or compression loss and replace damaged seals to prevent air infiltration. Drain floor channels and inspect the Era floor for corrosion every three months; clean with a neutral pH detergent and rinse thoroughly. Confirm thermostat calibration and refrigerant charge seasonally; engage certified CSA service technicians for R-404A remote system diagnostics.