Handle high-volume cold storage demands without sacrificing temperature control or service flow. This indoor walk-in cooler provides consistent medium temperature performance, accommodates substantial storage, and integrates with remote refrigeration systems for flexible placement. Operators gain a durable, code-listed cooler that suits kitchens, cafeterias, hospitals, and hospitality hubs.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove all product. Mix a mild detergent in warm water (use gallons or liters as needed) and scrub interior panels with a soft cloth. Clean the Era floor with a non-abrasive pad; rinse and dry. Vacuum condenser coils and inspect door seals; replace worn gaskets. Flush drain lines and check thermostat at medium temp (+35F). Schedule weekly surface wipe-downs and monthly coil service to reduce bacteria, fire risk, energy use, and equipment failures.#@@#Additional Info#@#Kolpak KF8-0808-CR is a 102" H x 93" W x 93" D indoor walk-in cooler for medium temperature (+35°F) with R-404A refrigeration, 208/230 volts, 26-gauge galvalume, aluminum floor, 2" thermometer, NSF and UL listings, and a 1,391-pound assembly.#@@#General Info#@#Description #@#
Handle high-volume cold storage demands without sacrificing temperature control or service flow. This indoor walk-in cooler provides consistent medium temperature performance, accommodates substantial storage, and integrates with remote refrigeration systems for flexible placement. Operators gain a durable, code-listed cooler that suits kitchens, cafeterias, hospitals, and hospitality hubs.
#@@# Galvalume Construction#@#
Galvalume panels on interior and exterior deliver corrosion resistance and long service life in humid and high-traffic environments. Installers receive rigid panel alignment that preserves thermal envelope integrity and reduces long-term repair needs.
#@@# Era Floor System#@#
The Era floor with a smooth aluminum surface creates a low-friction load zone that resists staining and simplifies cleaning cycles. Staff can maneuver carts and pallets with less effort while maintenance teams remove soils quickly during scheduled sanitation.
#@@# Remote Refrigeration#@#
Pre-charged remote refrigeration with R-404A refrigerant supports indoor or outdoor compressor placement to minimize heat and noise in service areas. Facility engineers can site condensers away from occupied spaces while preserving design flexibility for tight kitchens.
#@@# Medium Temperature Control#@#
Designed for +35F operation, the cooler maintains stable cold for perishable inventory and prepared foods during peak service periods. Food safety managers achieve consistent holding conditions that support HACCP plans and inspection standards.
#@@# Compliance And Listings#@#
The model carries NSF, cUL, and UL listings, ensuring compliance with common commercial requirements and permitting paths. Procurement teams receive documentation that simplifies specification and installation approvals.
#@@# Robust Dimensions#@#
With nominal 8' sides and overall dimensions near 102 inches high by 93 inches wide and 93 inches deep, the unit provides substantial cubic capacity without complex onsite assembly.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect door gaskets weekly; replace any with cracks or compression loss for temperature control. Lubricate hinge pins monthly and tighten fasteners to prevent air leaks. Clean condenser coils biweekly with a brush or low-pressure vacuum to sustain efficiency. Sanitize interior panels and floor with a neutral pH cleaner after hours to inhibit microbial growth. Verify thermostat calibration quarterly; record readings and adjust as needed to maintain +35F.