At 149 pounds, the top offers substantial mass to remain steady during high-impact tasks while allowing experienced installers to plan handling and mounting. Facilities staff assess mounting hardware and support frames to match the weight and dimensions specified.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug appliances and clear the surface. Use a soft cloth and mild soap to clean the John Boos SB011-O wood top. Wipe with the grain and avoid excess water to protect the laminated Antimicrobial Northern Hard Rock Maple finish. Clean the 4"H coved backsplash and ends thoroughly. Dry completely before use. Sanitize food contact areas with an approved CSA sanitizer. Regular cleaning prevents contamination, fires, higher utility use, and equipment failure.#@@#Additional Info#@#John Boos SB011-O work table top measures 72" W x 30" D x 1-3/4" thick. It features edge grain Northern Hard Rock Maple, a 4" H coved backsplash, and an antimicrobial surface that meets NSF standards. It weighs 149 pounds.#@@#General Info#@#Description #@#
At 149 pounds, the top offers substantial mass to remain steady during high-impact tasks while allowing experienced installers to plan handling and mounting. Facilities staff assess mounting hardware and support frames to match the weight and dimensions specified.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the John Boos SB011-O 72"W x 30"D x 1-3/4" thick work table top weekly for damage and joint separation; address cracks to prevent moisture intrusion. Sand worn areas with 120–220 grit paper, then apply penetrating oil finish per manufacturer instructions. Sanitize before and after food contact with approved NSF disinfectants; avoid high chlorine concentrations. Rotate cleaning products to prevent finish degradation. Maintain humidity between 35% and 55% to limit warping.