This floor-mounted mop sink is designed for demanding operations, combining robust 16/300 stainless steel construction with a compact footprint to deliver reliable sanitation performance in kitchens, hospitals, schools, and other service environments. Installers and facility managers will appreciate the NSF certification and service-ready dimensions that simplify integration into existing plumbing and utility layouts.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and remove debris. Scrub the stainless steel mop sink with a mild detergent and warm water, focusing on the 20"W x 16" front-to-back basin and 3-1/2" drain. Rinse thoroughly and dry to prevent water spots. Clean marine and tile edges to remove trapped grime. Inspect seals and fasteners; tighten or replace as needed. Clean surrounding floor and vents to reduce grease buildup and fire risk; regular cleaning prevents contamination, breakdowns, and failed CSA inspections.#@@#Additional Info#@#John Boos PBMS2016-6 mop sink is 24.63" W x 19.38" D x 10" H with a 20" x 16" x 6" compartment and a 3.5" drain. Made of 16/300 stainless steel, it has marine edges, is NSF certified, weighs 35 pounds, and is for commercial foodservice.#@@#General Info#@#Description #@#
This floor-mounted mop sink is designed for demanding operations, combining robust 16/300 stainless steel construction with a compact footprint to deliver reliable sanitation performance in kitchens, hospitals, schools, and other service environments. Installers and facility managers will appreciate the NSF certification and service-ready dimensions that simplify integration into existing plumbing and utility layouts.
The sink features a practical volume for mop rinsing and waste capture. Designers can plan routing around the 3-1/2 inches diameter drain that matches standard plumbing connections for fast hookup and reduced retrofit cost.
The assembly enables placement against walls without excessive protrusion into traffic lanes. Planners will find the compact height supports mounting at typical service elevations while preserving undercounter clearance where required.
The unit includes features designed to contain splashes and create a clean transition to wall finishes. Maintenance crews will notice fewer backsplash leaks and simplified wipe-downs due to the integrated edge geometry.
Fabricators formed the bowl and apron from 16/300 stainless steel to resist corrosion and maintain structural stability under frequent use. Operations staff will experience durable surfaces that stand up to chemical cleaners and repeated mechanical contact.
This floor-mounted configuration anchors directly to finished floors for stable, permanent placement in high-traffic areas. Maintenance teams will value the secure mounting that prevents movement during rigorous cleaning routines.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the John Boos PBMS2016-6 mop sink on a level floor and secure anchoring bolts to prevent movement. Flush the 3-1/2" diameter drain after each shift to avoid odor and blockage. Clean the 16/300 stainless steel surface with mild detergent and warm water; rinse thoroughly and dry to prevent water spots. Inspect marine and tile edges weekly for seal integrity and repair caulking as needed. Calibrate hanger and trap fittings monthly for leak prevention.