Stop sacrificing storage capacity for accessibility. This 80-inch aluminum keg rack organizes kegs and provides structural load capacity across three levels, enabling faster changeover and safer storage in high-turnover back-of-house environments. Designed for food service professionals, the rack balances footprint efficiency with durable construction to support routine handling and inventory flow.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe aluminum frame and tubing with mild detergent and warm water; use a soft cloth to avoid abrasion. Rinse with clean water and dry to prevent corrosion. For grease or sticky residue, apply a food-safe degreaser, scrub with a nylon brush, rinse, and dry. Inspect welds, posts, and shelves for damage weekly and tighten fasteners as needed. Regular cleaning prevents contamination of hands and items, deters pests, and preserves the rack's service life.#@@#Additional Info#@#John Boos ALKR-2080 Keg Rack measures 80" W x 20" D x 76" H. It has aluminum construction with three shelves for kegs. Mid and bottom shelves hold 60 lb/ft; top shelf holds 15 lb/ft. The unit weighs 88 pounds, ideal for foodservice keg storage.#@@#General Info#@#Description #@#
Stop sacrificing storage capacity for accessibility. This 80-inch aluminum keg rack organizes kegs and provides structural load capacity across three levels, enabling faster changeover and safer storage in high-turnover back-of-house environments. Designed for food service professionals, the rack balances footprint efficiency with durable construction to support routine handling and inventory flow.
#@@# Frame Construction.#@#
Aluminum square tubing forms the primary structure and minimizes corrosion risk in humid walk-in or garage conditions. Engineers specified 1-5/16 inches diameter posts to stabilize the frame while keeping weight manageable for easy positioning and installation.
#@@# Shelf Load Design.#@#
The middle and bottom shelves utilize 1-3/4 inches square tubing oriented front-to-back and rate at 60 pounds per foot, providing substantial linear support for stacked kegs. Operators can place kegs loosely across these shelves with predictable deflection characteristics under typical loading cycles.
#@@# Top Shelf Configuration.#@#
The top shelf employs the same 1-3/4 inches square tubing oriented left-to-right with a 15 pounds per foot rating to support ancillary equipment, signage, or empty kegs awaiting rotation. Staff can store lighter items above without compromising the load performance of lower shelves.
#@@# Capacity Planning.#@#
Three shelves accommodate between seven and ten kegs, depending on keg size and placement, enabling compact storage for peak service periods. Managers can plan inventory by measuring kegs against the 80 inches width and 20 inches depth to maximize throughput effectively.
#@@# Installation Footprint.#@#
The rack measures 80 inches wide by 20 inches deep by 76 inches high, delivering a narrow footprint that fits tight back-of-house aisles while preserving vertical storage. Facilities teams can position the unit near service lines to minimize transport distances during busy shifts.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect welds and posts weekly for deformation or corrosion; tighten loose fasteners and replace damaged components immediately. Clean aluminum surfaces with a pH-neutral cleaner and soft cloth; avoid abrasive pads and chlorides. Lubricate adjustable fittings with food-grade lubricant quarterly. Verify level and anchor points before loading kegs; distribute weight evenly across three shelves and observe the 60 lb/ft and 15 lb/ft ratings to prevent overloading. Check seals and alignment monthly.