Weighing 144 pounds and measuring 26 inches high by 18 inches wide, the disposer balances robust build quality with manageable footprint requirements. Operations planners allocate counter and undercounter space accurately when planning kitchen layouts.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and shut off circuit before work. Remove bowl and clean stainless steel surfaces with mild detergent and warm water; rinse and dry. Flush inlet and grinding chamber with hot water while running unit to remove residue. Scrub condenser coils and vents with soft brush; avoid abrasive pads. Inspect seals and gaskets for wear and replace when damaged. Schedule weekly degrease cycles to prevent fires, reduce breakdowns, lower energy use, and meet CSA and health-inspection standards.#@@#Additional Info#@#InSinkErator’s SS-500-18A-MRS disposer features a 5 HP stainless steel motor, an 18" bowl, and a 6-5/8" inlet. It operates at 208/230 volts and supports continuous commercial use, meeting CSA standards for kitchens.#@@#General Info#@#Description #@#
Weighing 144 pounds and measuring 26 inches high by 18 inches wide, the disposer balances robust build quality with manageable footprint requirements. Operations planners allocate counter and undercounter space accurately when planning kitchen layouts.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Culinary Depot usually InSinkErator SS-500-18A-MRS Disposer within # business days upon confirming cleared payment.#@@#Maintenance Guide#@#Service personnel should inspect the inSinkErator SS-500-18A-MRS disposer weekly for leaks, loose fittings, and wear. Tighten hardware to manufacturer torque values and replace deteriorated seals. Flush the unit daily with cold water for 30 seconds after use and run long enough to clear solids. Remove debris monthly; disconnect power and follow CSA wiring and lockout procedures. Lubricate splash guard seals with food-grade silicone and check dishwasher inlet clearance.