The disposer measures 15 inches in depth and 21 inches in height while weighing 70 pounds, offering a dense power-to-size ratio for limited undercounter spaces. Designers can integrate the unit into confined stations without sacrificing capacity.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and shut off power at breaker before cleaning. Remove large debris from chamber and flush with cold water. Mix mild detergent with warm water (use gallons or liters as needed) and scrub stainless steel surfaces with a non-abrasive brush. Rinse thoroughly and run water while activating disposer for 15 seconds. Clean inlet seal and mounting ring; inspect for wear and replace when damaged. Wipe exterior dry to prevent corrosion and reduce energy loss.#@@#Additional Info#@#InSinkErator’s SS-200-18B-CC101 Complete Disposer Package has a 2 HP stainless steel motor, 18" bowl, and 6-5/8" inlet. It operates on 115/208-230 volts and weighs 70 pounds, providing strong waste shredding for high-volume foodservice.#@@#General Info#@#Description #@#
The disposer measures 15 inches in depth and 21 inches in height while weighing 70 pounds, offering a dense power-to-size ratio for limited undercounter spaces. Designers can integrate the unit into confined stations without sacrificing capacity.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Culinary Depot usually InSinkErator SS-200-18B-CC101 Disposer within # business days upon confirming cleared payment.#@@#Maintenance Guide#@#Inspect seals and mounting hardware on the inSinkErator SS-200-18B-CC101 weekly to prevent leaks and vibration. Remove and clean grinding components monthly; flush with cold water while operating for 30 seconds after each use. Descale stainless steel surfaces quarterly with a citric acid solution following manufacturer concentration. Verify electrical connections at 115/208-230 volts every six months and torque mounting bolts to specified values. Replace worn gaskets promptly.