The disposer is designed for heavy organic waste loads and sustained duty cycles, ensuring busy kitchens remain operational and sanitary. It features straightforward installation and is compatible with standard commercial fixtures.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and lock out power to the Insinger S-500L-3 before service. Remove feed and clear visible debris from the 7" throat. Flush with warm water and a mild detergent, scrubbing the cast iron housing and 10" rotor with a non-abrasive brush. Rinse thoroughly and dry accessible surfaces. Check clamps and connector sleeve for tightness; tighten if loose. Inspect seals and replace worn parts. Reconnect power and run water to verify operation and prevent odors.#@@#Additional Info#@#Insinger’s S-500L-3 disposer features a 5 HP, 3-Ph motor at 208/230v, 60 Hz, 6.9 amps, and a 7" inlet with a 10" rotor. It weighs 220 pounds, includes a connector sleeve and clamps, and is ideal for commercial dishwashing.#@@#General Info#@#Description #@#
The disposer is designed for heavy organic waste loads and sustained duty cycles, ensuring busy kitchens remain operational and sanitary. It features straightforward installation and is compatible with standard commercial fixtures.
A 7 inch throat supports large-volume waste input and reduces clogging during peak service periods. Technicians can install it quickly with the included connector sleeve and clamps, minimizing downtime during equipment changeover.
The motor provides consistent torque for rapid particle reduction and maintains throughput under continuous use. Operators can rely on its electrical design to integrate with three-phase supply systems common in institutional and hospitality sites.
A 10 inch rotor delivers aggressive grinding action to efficiently break solids and reduce strain on drain systems. Maintenance teams find rotor access straightforward, allowing for routine inspections without lengthy service interruptions.
The cast iron construction withstands high-temperature washdown cycles and resists deformation under mechanical stress, offering a long service life and lower replacement frequency.
The unit draws 6.9 amps on rated voltage, allowing for accurate load planning for panel capacity and branch circuit sizing. Engineers can confidently specify this disposer when designing mechanical rooms that require precise power allocation.
The package includes a connector sleeve and clamps to streamline attachment to existing piping assemblies and create a sealed joint. Plumbers appreciate the reduced parts list, which accelerates commissioning and lowers initial labor costs.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Insinger S-500L-3 disposer weekly and remove debris to prevent wear. Use a nonabrasive brush and mild detergent to clean the 7" throat and 10" rotor; avoid solvents that harm seals. Verify electrical connections for 208/230v, 3-Ph supply and tighten terminals with power locked out. Lubricate motor bearings per manufacturer intervals and replace worn clamps and sleeves. Check for cracks in the cast iron housing and torque fasteners to spec.
