Serve operational demands without compromise with a heavy-duty stainless steel mop sink designed for continuous use in high-traffic facilities. This floor-mounted sink combines deep bowl capacity with a reinforced drop front to speed handling and maintain sanitation during frequent cleanups. Engineers designed the unit for institutional settings, providing robust construction and straightforward maintenance that supports daily workflows.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and clear the area. Scrub the 24"W x 18"D bowl with a mild detergent and non-abrasive pad; rinse and dry to prevent corrosion. Flush the 4" drain and remove debris to avoid clogs. Wipe the 16/304 stainless apron and coved corners; inspect seals and replace if worn. Clean floor around the floor-mounted unit to remove grease. Regular cleaning prevents contamination, reduces fire risk, lowers energy use, and helps pass CSA inspections.#@@#Additional Info#@#IMC Teddy FS-D stainless steel mop sink measures 27" x 21" x 15.5" with a 24"W x 18"D x 12" deep bowl, 4" drain, 16/304 stainless construction, welded apron, coved corners, and built-in pitch to the 4" waste outlet.#@@#General Info#@#Description #@#
Serve operational demands without compromise with a heavy-duty stainless steel mop sink designed for continuous use in high-traffic facilities. This floor-mounted sink combines deep bowl capacity with a reinforced drop front to speed handling and maintain sanitation during frequent cleanups. Engineers designed the unit for institutional settings, providing robust construction and straightforward maintenance that supports daily workflows.
#@@# Bowl Capacity#@#
Sink designers sized the bowl at 24 inches by 18 inches with a 12-inch depth to accommodate large mop heads and tools. Built-in pitch directs runoff to a 4-inch drain, reducing pooling and accelerating the evacuation of dirty water.
#@@# Welded Construction#@#
Manufacturers fully welded the sink with an integrated full-height apron to eliminate seams that trap soil. Operators receive a one-piece assembly that resists deformation under repeated loading and simplifies sanitizing.
#@@# Material Durability#@#
Fabricators used 16/304 stainless steel for corrosion resistance and structural strength in wet environments. Staff will notice reduced staining and a consistent finish after routine cleaning cycles.
#@@# Corner Design#@#
The sink features coved corners on a 1-inch radius to remove sharp junctions that harbor residue. Custodial teams will perform faster manual cleaning and meet stricter hygiene protocols more reliably.
#@@# Access Front#@#
Designers incorporated a drop front to improve access for scrubbing and equipment placement without requiring awkward reach. Maintenance crews gain ergonomic benefits and reduce strain during extended cleaning tasks.
#@@# Installation Profile#@#
The unit mounts to the floor for stable placement in service corridors, utility rooms, and dish areas where fixed fixtures perform best. Plumbers connect the 4-inch waste outlet to existing drainage systems with minimal adaptation.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the IMC Teddy FS-D mop sink by flushing the bowl and drain with hot water after each shift to prevent residue buildup. Inspect welds and coved corners weekly and remove deposits with a nylon brush and neutral pH cleaner. Sanitize surfaces using a food‑service approved sanitizer per label dwell time. Verify floor anchors and drop‑front latch monthly; tighten hardware to CSA torque specs. Lubricate hinge points sparingly and document all maintenance.