At approximately 63 inches wide, 78.5 inches high, and a 34.5 inch depth, this merchandiser fits standard fixture runs while maximizing vertical display. The packaged meats layout supports high-density stocking and reduces restock frequency during service peaks.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and remove all product. Wipe shelves with warm, soapy water and rinse; dry thoroughly. Clean interior with a mild detergent and soft cloth to remove bacteria and prevent contamination. Vacuum condenser coils monthly to improve efficiency and lower utility costs. Degrease vents and oven areas to reduce fire risk. Inspect door seals for cracks and replace when worn to avoid breakdowns. Drain per model requirements and ensure unit is dry before reconnecting power.#@@#Additional Info#@#Howard McCray SC-OM35E-5S-B-LED is a 63"W open merchandiser with R-404A refrigeration, four LED-lit shelves, black interior/exterior, 1 HP compressor, 115/208-230v 60Hz 1-Ph power, NEMA L14-20P cord, and needs a drain.#@@#General Info#@#Description #@#
At approximately 63 inches wide, 78.5 inches high, and a 34.5 inch depth, this merchandiser fits standard fixture runs while maximizing vertical display. The packaged meats layout supports high-density stocking and reduces restock frequency during service peaks.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#For consistent performance, clean condenser coils biweekly to remove dust and grease with a soft brush and vacuum. Defrost per manufacturer schedules and flush drain lines with a mild bleach solution to prevent clogs. Inspect door seals monthly and replace torn gaskets to maintain temperature stability. Verify refrigerant charge and monitor compressor amperage quarterly; record readings for analysis. Lubricate fan motors per CSA guidelines and tighten electrical connections as needed.