Optimize ice production without compromising system reliability. This remote condenser delivers consistent heat rejection and integrates seamlessly with KMS-822MLJ and KMS-830MLJ ice machines, ensuring stable operation in demanding foodservice environments. Installed on a 208/230v, 1-Ph electrical supply, the unit supports continuous operation while minimizing compressor run stress.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and shut power at breaker. Remove debris from condenser fins with a soft brush and vacuum at low suction. Wipe exterior panels with mild detergent and water; avoid abrasive pads. Check refrigerant lines for oil stains and tighten fittings if needed. Replace filters and inspect fan blades for damage; lubricate motor per manufacturer. Dry all surfaces before restoring power. Regular cleaning prevents bacteria, grease fires, higher energy use, equipment failure, and inspection failures.#@@#Additional Info#@#Hoshizaki SRK-10J remote condenser serves KMS-822MLJ and KMS-830MLJ ice machines, operating on 208/230 volts, 60 Hz, 1-Ph with 11.9 amps and R-404A refrigerant; unit measures 35.75" W x 37" H x 23.5" D, UL and cUL certified, and weighs 230 pounds.#@@#General Info#@#Description #@#
Optimize ice production without compromising system reliability. This remote condenser delivers consistent heat rejection and integrates seamlessly with KMS-822MLJ and KMS-830MLJ ice machines, ensuring stable operation in demanding foodservice environments. Installed on a 208/230v, 1-Ph electrical supply, the unit supports continuous operation while minimizing compressor run stress.
#@@# Power-Dense Cooling#@#
The condenser utilizes R-404A refrigerant and operates on a 208-230 volts, 60 Hz supply, providing robust thermal transfer for sustained ice output. Field technicians will note the designed amperage of 11.9 A for effective circuit planning and breaker sizing.
#@@# Remote Configuration#@#
As a remote condenser, the unit relocates heat load outside the production area, effectively lowering kitchen ambient temperatures. Engineers can separate mechanical noise and heat from cooking and service zones, enhancing staff comfort and extending equipment longevity.
#@@# Compact Footprint#@#
With a depth of 23.5 inches, a width of approximately 35.75 inches, and a height of about 37 inches, the assembly fits into service corridors and rooftop platforms where space is limited. Planners can position the condenser to optimize refrigerant piping length while ensuring maintenance access.
#@@# UL/CSA Safety Compliance#@#
The assembly carries UL and cUL certifications, ensuring compliance with North American electrical and safety standards for commercial installations. Facility managers receive documentation that supports permitting and insurance requirements.
#@@# Service-Friendly Design#@#
Technicians benefit from accessible panels and standardized electrical specifications, which reduce diagnostic time during preventive maintenance or repairs. The consistent parts and refrigerant type simplify stocking needs and ordering logistics.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Culinary Depot usually ships the Hoshizaki SRK-10J Remote Condenser within # business days of receiving cleared payment.#@@#Maintenance Guide#@#Maintain the Hoshizaki SRK-10J remote condenser by inspecting fins and coils monthly; remove debris with a soft brush and vacuum to preserve airflow. Drain moisture from condensate lines and verify R-404A charge and connections quarterly. Lubricate fan motor bearings per manufacturer intervals and confirm 208-230 volts supply and 11.9 amp draw under load. Replace damaged gaskets and tighten electrical terminals to prevent faults and ensure continuous operation.