Designed for continuous work, the cutter handles up to 15 pounds per batch and weighs 185 pounds for stable operation during high-speed cycles. Supervisors will value the unit’s mass for reduced vibration and consistent cut quality.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and lock out power before cleaning. Remove blades and attachments; soak in warm, soapy water and scrub with a soft brush. Wipe the stainless steel bowl and exterior with a mild detergent solution, then rinse and dry. Clean vents and motor housing with compressed air to remove grease and debris. Inspect seals and replace if worn. Clean daily to prevent bacteria, reduce fire risk from grease, lower energy use, avoid breakdowns, and pass CSA and health inspections.#@@#Additional Info#@#Hobart's 84186-5 aluminum food cutter with #12 hub runs on 230 volts, 60 Hz, 3-phase power, delivering 0.5 HP via a one-speed motor.#@@#General Info#@#Description #@#
Designed for continuous work, the cutter handles up to 15 pounds per batch and weighs 185 pounds for stable operation during high-speed cycles. Supervisors will value the unit’s mass for reduced vibration and consistent cut quality.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Culinary Depot usually Hobart 84186-5 Feed Cutter within # business days upon confirming cleared payment.#@@#Maintenance Guide#@#Inspect blades and attachments daily for wear; replace any components that show nicks or deformation to maintain cutting precision. Drain and clean the stainless steel bowl after each shift using a food-safe detergent and hot water, then sanitize per facility protocol. Lubricate gearbox per Hobart intervals and verify electrical connections for 230v, 3-Ph supply before operation. Calibrate safety interlocks and test emergency stop monthly to ensure operator protection.