Deliver consistent heat and reliable holding capacity for high-volume service with a built-in heated shelf designed for continuous operation. This aluminum unit is engineered for flush-top installation, maintaining product temperature while integrating seamlessly into counters and display lines. Engineers and service managers will appreciate the controlled thermal output and certified safety features that support foodservice regulations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit before cleaning. Remove debris and wipe aluminum surfaces with mild detergent and a soft cloth. Rinse with clean water and dry thoroughly to prevent corrosion. Clean thermostat knob and illuminated switch gently to avoid damage. Vacuum vents and condenser areas to remove grease and dust; inspect seals and mount brackets for wear. Perform weekly deep clean of heated top and monthly coil cleaning to reduce fire risk, lower energy use, and maintain CSA and NSF compliance.#@@#Additional Info#@#Hatco’s GRSBF-30-I heated shelf is 31.5" W x 21" D, delivers 665 Watts at 120 volts, features a hardcoat aluminum top, thermostatic control, and an illuminated switch.#@@#General Info#@#Description #@#
Deliver consistent heat and reliable holding capacity for high-volume service with a built-in heated shelf designed for continuous operation. This aluminum unit is engineered for flush-top installation, maintaining product temperature while integrating seamlessly into counters and display lines. Engineers and service managers will appreciate the controlled thermal output and certified safety features that support foodservice regulations.
#@@# Thermostatic Control#@#
Adjust temperature quickly and maintain set points with the built-in thermostatic control that responds to load changes. Operators can achieve repeatable holding temperatures across the 31.5 inches of surface while avoiding unnecessary energy draw.
#@@# Flush Top Design#@#
Install into counters with a flush top that provides a level, sanitary presentation surface and simplifies transfer between prep and service. The low-profile rim reduces the risk of trays tripping and supports efficient plate staging during peak periods.
#@@# Aluminum Construction#@#
Rely on hardcoat aluminum for even heat distribution and corrosion resistance under constant use. This material lowers weight compared with heavier metals and allows faster recovery when staff place cold pans onto the warmer plate.
#@@# Illuminated Switch#@#
Operate the unit with an illuminated on/off switch that provides visual confirmation of power status from a distance. Staff can verify operation immediately, improving speed of service and preventing accidental downtime.
#@@# Electrical Performance#@#
Expect consistent output from a 120v, 1-Ph platform drawing 5.6 amps and delivering 665 Watts managed at 60 hertz. Facilities with standard NEMA 5-15P circuits can integrate this unit without special wiring.
#@@# Certifications and Safety#@#
Comply with industry standards through multiple certifications, including NSF, CE, UL, cUL, CSA, and UL EPH classification, which demonstrate third-party validation for sanitation and electrical safety.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Hatco GRSBF-30-I heated shelf weekly for debris and wipe the aluminum top with a damp cloth and mild detergent; avoid abrasive pads that damage the hardcoat finish. Verify thermostat operation and illuminated switch; calibrate thermostat if temperature drifts. Tighten mounting brackets and confirm the unit remains level. Disconnect power before servicing, allow cooling, and test electrical cords and NEMA 5-15P plug for wear.