Built for rigorous commercial sanitation, this undersink electric heater ensures consistent thermal performance for 16" to 18" square sink installations. Its 4,500-watt heating element maintains sanitizing temperatures on 208v, 3-Phase electrical service, ensuring reliability in busy kitchens, hospitals, universities, and large foodservice operations. The unit is NSF, CE, and cULus certified and comes from a company established in 1998 with expertise in institutional and hospitality markets.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the Hatco 3CS-4B sink heater before cleaning. Drain water and remove panels per manufacturer instructions. Wipe stainless front and accessible surfaces with mild detergent and a soft cloth. Flush and sanitize the sink area with approved solution, then rinse thoroughly. Inspect seals and wiring for damage; tighten connections if needed. Reassemble panels, restore power, and verify 208v operation. Clean weekly to prevent bacteria, grease buildup, and equipment failures.#@@#Additional Info#@#Hatco 3CS-4B electric heater delivers 4,500W at 208v, 3-Phase for 16"–18" sinks; stainless steel front, NSF, CE, cULus certified, 12.5 amps, 50/60 Hz, made in USA, ideal for kitchens, hospitals, schools, bars.#@@#General Info#@#Description #@#
Built for rigorous commercial sanitation, this undersink electric heater ensures consistent thermal performance for 16" to 18" square sink installations. Its 4,500-watt heating element maintains sanitizing temperatures on 208v, 3-Phase electrical service, ensuring reliability in busy kitchens, hospitals, universities, and large foodservice operations. The unit is NSF, CE, and cULus certified and comes from a company established in 1998 with expertise in institutional and hospitality markets.
#@@# Compact Undersink Design#@#
Mounts under standard sinks to save counter space and integrate with existing plumbing. The 17.13" depth and 8" width minimize cabinet intrusion while providing full heating capacity for sink areas.
#@@# Balanced Heating Element#@#
The 4,500-watt element ensures uniform thermal distribution, reducing hot spots, shortening recovery time, and maintaining sanitizing temperatures required by institutional protocols.
#@@# 208 Volt, 3-Phase Operation#@#
Runs on 208v, 3-Phase service, drawing 12.5 amps at 50/60 Hz for efficient electrical use. This supports stable power delivery during peak service periods.
#@@# Stainless Front Construction#@#
The stainless steel front resists corrosion and simplifies cleaning in regulated environments. Its durable finish meets hygiene standards for hospitals, schools, and high-volume kitchens.
#@@# Compliance And Certification#@#
NSF, CE, and cULus certifications ensure regulatory compliance for North American and international installations. These validate safety, electrical compliance, and suitability for commercial sanitizing.
#@@# Made In USA Manufacturing#@#
Made in the USA, the heater benefits from domestic quality standards. Its 30-pound weight and compact design allow easy installation and maintenance by facility technicians.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Hatco 3CS-4B sink heater by descaling heating elements monthly using a manufacturer-approved descaler to prevent mineral buildup. Inspect electrical connections quarterly; tighten terminals and verify 208v supply and 12.5 amp draw. Clean stainless steel front with a nonabrasive cleaner and soft cloth after each shift. Test thermostat and safety controls biannually and replace worn gaskets immediately to preserve NSF compliance and operational reliability.
