Measures 42 inches wide, 8 inches deep overall, and weighs approximately 15 pounds, fitting standard underbar openings while minimizing load on mounting surfaces. Designers specify the rail when planning compact service lines that require robust drainage solutions.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and remove bottles. Scrub the perforated insert with warm, soapy water; rinse and air dry. Flush the 1/2" welded tailpiece and clear vinyl drain tube with hot water. Wipe stainless steel surfaces with a non-abrasive cleaner and soft cloth; polish seams. Inspect seals and fasteners; tighten the (3) #10 x 1/2" screws and replace damaged parts. Clean weekly to prevent sickness, fires, energy waste, breakdowns, and to pass CSA inspections.#@@#Additional Info#@#Glastender DR-42R 42" stainless steel underbar drink rail mounts under counters and drains right via a 1/2" tailpiece. It includes a 4" deep removable insert, ETL-Sanitation listing, 10 ft. drain tube, screws, clamps, and weighs 15 pounds.#@@#General Info#@#Description #@#
Measures 42 inches wide, 8 inches deep overall, and weighs approximately 15 pounds, fitting standard underbar openings while minimizing load on mounting surfaces. Designers specify the rail when planning compact service lines that require robust drainage solutions.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Glastender DR-42R drink rail weekly for debris and verify the 1/2" welded tailpiece remains sealed. Remove the 4"D perforated insert and clean with warm, soapy water; sanitize per CSA or ETL-Sanitation guidelines. Flush the drain with 10 ft. of clear vinyl drain tube connected and remove clogs. Tighten three #10 x 1/2" stainless screws and cable clamps quarterly. Lubricate mounting points lightly and confirm level installation to prevent pooling and corrosion.