Stop losing floor space to spill cleanup and slow maintenance. This stainless steel drop-in drip trough integrates into counters for efficient drain management and quick service recovery. Designed for bars, cafeterias, hospitals, and campus foodservice, it supports high-throughput draft systems while meeting ETL-Sanitation standards.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit. Remove perforated inserts and wash with warm, soapy water; rinse and dry. Clean trough and flanged edge with non-abrasive cleaner; avoid harsh pads. Flush 1/2" welded tailpiece and attached 10 ft. vinyl drain tube with warm water. Inspect and tighten supplied #10 x 1/2" screws and cable clamps. Check seals and remove grease from vents to prevent fire and equipment wear. Regular cleaning reduces bacteria, lowers utility use, and helps pass inspections.#@@#Additional Info#@#Glastender DI-DP18X48 drip tray measures 48" W x 18" D, needs a 46-1/4" W x 16-1/4" cutout, includes inserts, self-rimming edge, drain, kit with tube, clamps, screws; stainless steel, ETL-listed, 30 lbs.#@@#General Info#@#Description #@#
Stop losing floor space to spill cleanup and slow maintenance. This stainless steel drop-in drip trough integrates into counters for efficient drain management and quick service recovery. Designed for bars, cafeterias, hospitals, and campus foodservice, it supports high-throughput draft systems while meeting ETL-Sanitation standards.
#@@# Flanged Self-Rimming#@#
A flanged self-rimming edge simplifies drop-in mounting and secures the trough to countertop cutouts. The required cutout is 46-1/4"W x 16-1/4"D, ensuring precise integration into service lines.
#@@# Removable Perforated Inserts#@#
Perforated inserts lift out for easy cleaning and access to the trough base. Screens capture drips and debris, reducing clogs and maintaining drain flow.
#@@# Integrated Drain Tailpiece#@#
The 1/2" welded tailpiece provides a leak-resistant connection to waste lines. The kit includes 10 feet of clear vinyl drain tube and two 1/2" x 1/2" plastic elbows for streamlined setup.
#@@# Stainless Steel Construction#@#
The stainless steel body resists corrosion, staining, and wear, supporting repeated sanitation cycles in institutional environments.
#@@# ETL-Sanitation Listing#@#
The unit’s ETL-Sanitation listing ensures compliance with food and drink service standards, simplifying inspections.
#@@# Complete Installation Kit#@#
The kit includes hardware for easy installation: a 4" Ty-wrap, three #10 x 1/2" black sheet metal screws, and three cable clamps. These items reduce delays and align with commercial plumbing practices.
Specifications meet operational needs: 48" nominal width, 18" depth, 37"–48" length compatibility, and 30 pounds shipping weight. Use the trough as a plate-side or bar-side warmer plate alternative for drip control and sanitation in restaurants, hospitals, universities, and hospitality venues.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Glastender DI-DP18X48 drip tray by flushing the drain weekly with warm water and a mild enzymatic cleaner to prevent clogging. Remove perforated inserts and soak them monthly in a food-safe degreaser, then air-dry completely before reassembly. Inspect the 1/2" welded tailpiece and clear vinyl drain tube for cracks or kinks quarterly and replace fittings showing wear. Sanitize stainless surfaces after each service period and tighten sheet metal screws as needed.