By capturing solids at the point of rinse, the tray reduces particulate load entering plumbing and downstream filtration. Hospital, university, and hospitality operators gain cleaner drain lines and improved compliance with sanitary protocols.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment before service. Remove existing waste and clip the Glastender CWET-GW onto the GW-24 frame. Empty trays into a designated waste container after each shift. Clean with a mild detergent and warm water, scrub with a non-abrasive brush, rinse thoroughly, and air dry. Inspect seals and mounting clips for wear; replace if compromised. Regular cleaning prevents contamination, reduces fire risk from grease buildup, lowers energy use, and helps pass CSA inspections.#@@#Additional Info#@#Glastender CWET-GW Clip-On Wet Waste for GW-24 offers a removable tray for GW-24 glasswashers to collect liquids and debris. It measures 24" wide by 4" high and deep, weighs 10 pounds, and supports sanitation and maintenance, CSA compliant.#@@#General Info#@#Description #@#
By capturing solids at the point of rinse, the tray reduces particulate load entering plumbing and downstream filtration. Hospital, university, and hospitality operators gain cleaner drain lines and improved compliance with sanitary protocols.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Glastender CWET-GW Clip-On Wet Waste for GW-24 weekly. Remove debris to prevent odors and flow issues. Use a nylon brush and warm water with mild detergent; avoid caustic cleaners. Disconnect power and close supply valves before servicing. Check clip fittings and replace worn clips for secure attachment. Ensure proper alignment within 24 inches of the outlet for optimal drainage. Record maintenance actions and replace the unit if corrosion exceeds 10% of the visible area.
